An Autonomous Institution
Department of
An Autonomous Institution
| Sl. No | No of Papers | Author | Title of Paper | Source | SCI/Scopus/UGC |
|---|---|---|---|---|---|
| 1 | 1 | Dr. A. Rajendra Prasad | Investigation on Mechanical and Thermal Properties of a Kenaf/ Jute Fiber- Reinforced Polyester Hybrid Biocomposite | Advances in Polymer Technology, Hindawi Publisher, Article ID 7408135, 6 pages https://doi.org/10.1155/2022/ 7408135: Year 2022 | SCIE |
| 2 | 2 | Experimental studies of solar still with tar‐ coated blue metal stones: Energy and exergy study | Environmental Progress & Sustainable Energy, 09, September 2022, https://doi.org/10.1002/ep.13 997 : Year 2022 | SCIE | |
| 3 | 3 | Performance analysis of tubular solar still with different water depths on corrugated and flat absorbers | Journal of Water Supply: Research and Technology, AQUA — Water Infrastructure, Ecosystems and Society Vol 00 No 0, 1 doi: 10.2166/aqua.2022.253 : Year 2022 | SCIE | |
| 4 | 4 | Developing a dual axis photoelectric tracking module using a multi quadrant photoelectric device | Energy Reports, Volume 8, Supplement 9, 2022, Pages, 1426-1439, ISSN 2352-4847, https://doi.org/10.1016/j.egyr.2022.07.095. | SCIE | |
| 5 | 5 | Neural Network modelling for prediction of energy in hybrid renewable energy systems | Energy Reports, Volume 8, Supplement 8, 2022, Pages 999-1008, ISSN 2352-4847, https://doi.org/10.1016/j.egyr.2022.10.284. | SCIE | |
| 6 | 6 | Concentrator-assisted solar still for improving freshwater yield: an experimental approach | Environmental Science and Pollution Research (2022). https://doi.org/10.1007/s1135 6-022-23926-5, Nov 2022 | SCIE | |
| 7 | 7 | Investigation on Mechanical and Thermal Properties of a Kenaf/Jute Fiber- Reinforced Polyester Hybrid Biocomposite | Advances in Polymer Technology, July 2022, Publisher: Hindawi | SCIE | |
| 8 | 1 | Dr. B. VijayaRamnath | Effect of brown rice husk α-Si3N4 on Ni–P composite coating of austenitic AISI 316L steel: Taguchi grey relational approach | Biomass Conversion and Biorefinery, 2022, https://doi.org/10.1007/s1339 9-021-02138-w | SCIE |
| 2 | Investigation of Mechanical Behaviour of Polypropylene Based Composite | Journal of Mines, Metals and Fuels, 70(8A): 1-479; 2022. DOI: 10.18311/jmmf/2022/32019 | Scopus | ||
| 3 | Delamination studies and effects of machining parameters on delamination of PC-GFRP and aramid-GFRP composites | Materials Today: Proceedings, Volume 72, Part 4, 2023, Pages 2199-2205, ISSN 2214-7853, https://doi.org/10.1016/j.matp r.2022.08.467. | Scopus | ||
| 9 | 1 | Dr. U. Tamilarasan | Mechanical Behaviour and Thermal Properties of Pine Apple Leaf Fiber Reinforced Vinyl Ester Composites | Hindawi Advances in Polymer Technology Volume 2022, Article ID 4386650, 8 pages https://doi.org/10.1155/2022/ 4386650 | SCIE |
| 10 | 2 | Study of Mechanical Properties on Ferric Oxide Microparticles Reinforced with Polyethylene | Hindawi Advances in Materials Science and Engineering Volume 2022, Article ID 3077301, 7 pages https://doi.org/10.1155/2022/ 3077301 | SCIE | |
| 11 | 1 | Mr. V. Ravi Raj | Demonstrating and Investigating the Mechanical Strength of Solar Cells | Hindawi, International Journal of Photoenergy Volume 2022, Article ID 4713869, 9 pages https://doi.org/10.1155/2022/ 4713869 | SCIE |
| 12 | 1 | Dr. R. Ashok Gandhi | Tensile, double shear properties of acacia and Acacia-Kenaf fiber composites, | Materials Today: Proceedings, Volume 62, Part 2, 2022, Pages 1266-1271, ISSN 2214-7853, https://doi.org/10.1016/j.matp r.2022.04.557. | Scopus |
| 13 | 2 | Studies on Wear Behaviour of Polypropylene (PP)–Terminalia chebula (TC) Composite | Recent Advances in Materials Technologies. Lecture Notes in Mechanical Engineering. Springer, Singapore. https://doi.org/10.1007/978- 981-19-3895-5_4 | Scopus | |
| 14 | 1 | Mr. S. Ravindran | Influence of nano-TiC content on the properties of Al2024 aluminium metal matrix composites. | Materials Today: Proceedings, Volume 69, Part 3, 2022, Pages 922-926, ISSN 2214-7853, https://doi.org/10.1016/j.matp r.2022.07.371. | Scopus |
| 15 | 2 | Experimental investigation of wake velocity in cylindrical tower using hot wire anemometer | AIP Conference Proceedings 2393, 020209 (2022) https://doi.org/10.1063/5.007 4131 | Scopus | |
| 16 | 1 | Mr. R. Bhoopathi | Chapter 10 - Hemp fibers, their composites and applications | In The Textile Institute Book Series, Plant Fibers, their Composites, and Applications,Woodhead Publishing, 2022, Pages 233-252, ISBN 9780128245286, https://doi.org/10.1016/B978- 0-12-824528-6.00013-8. | Scopus |
| 17 | 1 | Mr. R. Senthil Kumar | Fiber Orientation Infuence on Mechanical Properties of SiC Particles Filled Epoxy Based Composites Reinforced with Al mesh and Unidirectional Basalt Fibers | Silicon, Springer, Vol.:(0123456789) 13 https://doi.org/10.1007/s12633-022-02183-8, Nov 12, 2022 | SCIE |
| Dr. S. Rajesh | Review on Mechanical Characteristics of Kevlar Composites | Journal of Mines, Metals and Fuels, 70(8A): 1-479; 2022. DOI: 10.18311/jmmf/2022/32004 | Scopus | ||
| 18 | 1 | Dr. C. Parswajinan | Flexible Polymer Solar Cells with High Efficiency and Good Mechanical Stability | Hindawi International Journal of Photoenergy Volume 2022, Article ID 4931922, 8 pages https://doi.org/10.1155/2022/ 4931922 | SCIE |
| 19 | 1 | Mr. M. Sudhakar | Thermomechanical pretreatment of Al-Zr- Mg-Cr alloy to improve the performance through creep-age forming, | Materials Today: Proceedings, Volume 59, Part 2, 2022, Pages 1520-1525, ISSN 2214- 7853, https://doi.org/10.1016/j.matp r.2022.01.405. | Scopus |
| 20 | 2 | Investigation of Curing Mechanism and Mechanical Properties of Polypropylene/Aliphatic Epoxy Composites | Advances in Polymer Technology, Hindawi ISSN - 0730-6679, https://doi.org/10.1155/2022/ 4167871 | SCIE | |
| 21 | 3 | Study on Developments in Protection Coating Techniques for Steel | Hindawi, Advances in Materials Science and Engineering Volume 2022, Article ID 2843043, 10 pages https://doi.org/10.1155/2022/ 2843043 | SCIE | |
| 22 | 4 | Mechanical Strengthening of Lightweight Aluminium Alloys through Friction Stir Process | Hindawi Advances in Materials Science and Engineering Volume 2022, Article ID 8907250, 10 pages https://doi.org/10.1155/2022/ 8907250 | SCIE | |
| 23 | 5 | Battery Energy Forecasting in Electric Vehicle Using Deep Residual Neural Network | Hindawi International Journal of Photoenergy Volume 2022, Article ID 5959443, 8 pages https://doi.org/10.1155/2022/ 5959443 | SCIE | |
| 24 | 6 | Bio polymer based food packaging using composite materials, | Materials Today: Proceedings, Volume 66, Part 3, 2022, Pages 834-837, ISSN 2214- 7853, https://doi.org/10.1016/j.matp r.2022.04.434. | Scopus | |
| 25 | 7 | Impact of BN and WC Particulate Reinforcements on Mechanical Properties and Damage Development of Al-2048 Metal Matrix Composites | Hindawi Advances in Materials Science and Engineering Volume 2022, Article ID 2286713, 9 pages https://doi.org/10.1155/2022/ 2286713 | SCIE | |
| 26 | 8 | Deep Learning Model on Energy Management in Grid-Connected Solar Systems | Hindawi International Journal of Photoenergy Volume 2022, Article ID 6371182, 8 pages https://doi.org/10.1155/2022/ 6371182 | SCIE | |
| 27 | 9 | Performance Development and Evaluation of Solar Air Collector with Novel Phase Change Material | Hindawi International Journal of Photoenergy Volume 2022, Article ID 3787141, 12 pages https://doi.org/10.1155/2022/ 3787141 | SCIE | |
| 28 | 10 | A Holistic Framework for Environment Conscious Based Material Selection and Experimental Assessment Using Digraph- Based Expert System | Hindawi Scientific Programming Volume 2022, Article ID 2112683, 10 pages https://doi.org/10.1155/2022/ 2112683 | SCIE | |
| 29 | 11 | Design and comparison of metaheuristic optimization learning approach PID controller for self-balancing bicycle | AIP Conference Proceedings 2519, 050067 (2022); https://doi.org/10.1063/5.011 0000 | Scopus | |
| 30 | 12 | Designing and implementing a smart transplanting framework using programmable logic controller and photoelectric sensor, | Energy Reports, Volume 8, Supplement 9, 2022, Pages 430-444, ISSN 2352-4847, https://doi.org/10.1016/j.egyr. 2022.07.019. | SCIE | |
| 31 | 13 | A novel and comprehensive mechanism for the energy management of a Hybrid Micro- grid System | Energy Reports, Volume 8, Supplement 8, 2022, Pages 847-862, ISSN 2352-4847, https://doi.org/10.1016/j.egyr.2022.09.207. | SCIE | |
| 32 | 14 | Machine learning Technique for improving the stability of Thermal Energy storage, | Energy Reports, Volume 8, Supplement 8, 2022, Pages 897-907, ISSN 2352-4847, https://doi.org/10.1016/j.egyr.2022.09.205. | SCIE | |
| 33 | 15 | Role of machine learning in attaining environmental sustainability, | Energy Reports, Volume 8, Supplement 8, 2022, Pages 863-871, ISSN 2352-4847, https://doi.org/10.1016/j.egyr.2022.09.206. | SCIE | |
| 34 | 16 | Machine Learning Strategy for Solar Energy optimisation in Distributed systems, | Energy Reports, Volume 8, Supplement 8, 2022, Pages 872-881, ISSN 2352-4847, https://doi.org/10.1016/j.egyr.2022.09.209. | SCIE | |
| 35 | 17 | Machine Learning approach for Prediction of residual energy in batteries, | Energy Reports, Volume 8, Supplement 8,2022, Pages 756-764, ISSN 2352-4847, https://doi.org/10.1016/j.egyr.2022.10.027. | SCIE | |
| 36 | 18 | Energy efficient tubular solar still for augmented yield using electrical heater, | Energy Reports, Volume 8, Supplement 8, 2022, Pages 959-964, ISSN 2352-4847, https://doi.org/10.1016/j.egyr.2022.10.283. | SCIE | |
| 37 | 19 | Power yield improvement of wind turbine and fatigue load mitigation using predictive-based Active flow controller, | Energy Reports, Volume 8, Supplement 8, 2022, Pages 989-998, ISSN 2352-4847, https://doi.org/10.1016/j.egyr.2022.10.285. | SCIE | |
| 38 | 20 | An approach to the utilization of grid integration to analyze the performance and quality of solar photovoltaic model, | Energy Reports, Volume 8, Supplement 8, 2022, Pages 1029-1044, ISSN 2352-4847, https://doi.org/10.1016/j.egyr.2022.10.282. | SCIE | |
| 39 | 1 | Mr. M. C. Anand Chakravarthi | Study on induced aeration for fishery fields using floating SPV | Journal of Physics: Conference Series 2272 (2022) 012007 IOP Publishing doi:10.1088/1742- 6596/2272/1/012007 | Scopus |
| 40 | 2 | Analyzing the performance of combined solar photovoltaic power system with phase change material, | Energy Reports, Volume 8, Supplement 9, 2022, Pages 43-56, ISSN 2352-4847, https://doi.org/10.1016/j.egyr.2022.06.109. | SCIE | |
| 41 | 3 | Determination of prohibition mechanism of cationic polymer / SiO2 composite as inhibitor in water using drilling fluid | Materials Today: Proceedings, Volume 69, Part 3, 2022, Pages 1080-1086, ISSN 2214-7853, https://doi.org/10.1016/j.matp r.2022.08.171. | Scopus | |
| 42 | 4 | Wind turbine generators with boost converter system based on hybrid technology | AIP Conference Proceedings 2519, 050058 (2022); https://doi.org/10.1063/5.010 9992 | Scopus | |
| 43 | 5 | Sustainable Power Generation with Fluidized Bed Combustion. | Recent Advances in Energy Technologies. Lecture Notes in Mechanical Engineering. Springer, Singapore. https://doi.org/10.1007/978- 981-19-3467-4_38 | Scopus | |
| 44 | 1 | Mr. V. Prabu | Improving the Efficiency of Photovoltaic Panels Using Machine Learning Approach | Hindawi International Journal of Photoenergy Volume 2022, Article ID 4921153, 6 pages https://doi.org/10.1155/2022/ 4921153 | SCIE |
| 45 | 2 | Analysis and implementation of a high switching frequency dynamic wireless power transfer technique for electric vehicle charging devices | AIP Conference Proceedings 2519, 050060 (2022); https://doi.org/10.1063/5.010 9995 | Scopus | |
| 46 | 1 | Mr. S. K. Dinesh Kumar | Influence of SiC and BaO nano composites on chemical and mechanical behaviour of modified concrete | Materials Today: Proceedings, Volume 69, Part 3, 2022, Pages 1247-1252, ISSN 2214-7853, https://doi.org/10.1016/j.matp r.2022.08.322. | Scopus |
| 47 | 2 | Mr. S. K. Dinesh Kumar | An application of the frequency-based matrix converter used in a wind energy conversion system using a synchronous generator with synchronous variable- speed, pulse width modulation technique | AIP Conference Proceedings 2519, 050001 (2022); https://doi.org/10.1063/5.011 0786 | Scopus |
| 48 | 1 | Mr. T. Babu | Analysis on Ackermann Error of Steering System using Variable Length TieRod mechanism | International Journal of Vehicle Structures & Systems, 14(3), 374-378, ISSN: 0975-3060 (Print), 0975-3540 (Online) doi: 10.4273/ijvss.14.3.18 | Scopus |
| 49 | 2 | Simulation study of high velocity impact analysis on AA7075 nanocomposites | AIP Conference Proceedings 2446, 120002 (2022); https://doi.org/10.1063/5.010 8086 Published Online: 29 November 2022 | Scopus | |
| 50 | 1 | Mr.S. Siva Chandran | Distinguished DC-DC Converter for an Electric Vehicle | 6th International Conference on Computing Methodologies and Communication (ICCMC), 2022, pp. 578-582, doi: 10.1109/ICCMC53470.2022.97 53880. | Scopus |
| 51 | 2 | Experimental study of shell and tube heat exchanger | AIP Conference Proceedings 2473, 020005 (2022) https://doi.org/10.1063/5.009 6706 | Scopus | |
| 52 | 3 | Magnesium alloy machining and its methodology: A systematic review and analyses | AIP Conference Proceedings 2473, 020003 (2022) https://doi.org/10.1063/5.009 6398 | Scopus | |
| 53 | 4 | Performance analysis of steam generators in thermal power plant | AIP Conference Proceedings 2473, 020006 (2022) https://doi.org/10.1063/5.009 6593 | Scopus | |
| 54 | 5 | Review on direct steam generation using concentrated solar collectors | AIP Conference Proceedings 2473, 020008 (2022), https://doi.org/10.1063/5.009 6803 | Scopus | |
| 55 | 6 | Thermal management of solar thermoelectric power generation | AIP Conference Proceedings 2473, 020010 (2022) https://doi.org/10.1063/5.009 6456 | Scopus | |
| 55 | 1 | Mr. E. VetreSelvan | Fabrication and Analysis of the HLM Method of Layered Polymer Bumper with the Fracture Surface Micrographs | Hindawi Advances in Materials Science and Engineering Volume 2022, Article ID 3002481, 9 pages https://doi.org/10.1155/2022/ 3002481 | SCIE |
| Sl. No | No of Papers | Author | Title of Paper | Source | SCI/Scopus/UGC |
|---|---|---|---|---|---|
| 1 | 1 | Dr. A. Rajendra Prasad | Mechanical behaviour of nano ceramic particles reinforced aluminium matrix composites | Materials Today: Proceedings, Elsevier, 2022/1/31 | Scopus |
| 2 | 2 | Performance enhancement of solar photovoltaic system for roof top garden | Environmental Science and Pollution Research, Springer Berlin Heidelberg, Volume 28, Issue 36, Pages 50017-50027, 2021/9 | SCI | |
| 3 | 3 | Energy and exergy efficiency analysis of solar still incorporated with copper plate and phosphate pellets as energy storage material | Environmental Science and Pollution Research, Springer Berlin Heidelberg, Volume 28, Issue 35, Pages 48628-48636, 2021/9 | SCI | |
| 4 | 4 | Effect of fins and silicon dioxide nanoparticle black paint on the absorber plate for augmenting yield from tubular solar still | Environmental Science and Pollution Research, Springer Berlin Heidelberg, Volume 28, Issue 26, Pages 35102-35112, 2021/7 | SCI | |
| 5 | 5 | Performance of solar still using phosphate granules as energy storing materials : an experiment study | Desalination and water treatment, January 2022 | SCI | |
| 6 | 6 | Performance of solar still powered water recovery system from moist air | Materials Today: Proceedings, Elsevier, 2021/12/31 | Scopus | |
| 7 | 7 | Analysis of a solar still with photovoltaic modules and electrical heater-Energy and exergy approach | Environmental Science and Pollution Research | SCI | |
| 8 | 8 | PDT treatment techniques using nano- composite material | Materials Today Proceedings, 12th May 2022 | Scopus | |
| 9 | 1 | Dr. B. VijayaRamnath | Experimental Investigations on Dry Sliding Wear Behavior of Kevlar and Natural Fiber-Reinforced Hybrid Composites through an RSM–GRA Hybrid Approach | Materials, Multidisciplinary Digital Publishing Institute, 15,3,749, 2022/1 | SCI |
| 10 | 2 | Determination of Mechanical Behavior of Al–CNT | Elsevier,147-159, 2022/1/1 | Scopus | |
| 11 | 3 | Studies on Magnesium Alloy: Composites for Aerospace Structural Applications | Advanced Composites in Aerospace Engineering Applications, Springer, Cham, 163-175,2022 | SCI | |
| 12 | 4 | Evaluation of Mechanical Properties of Woven Hybrid Reinforced Composites Fabricated by Vacuum Assisted Compression Molding Technique | Bio-Fiber Reinforced Composite Materials, Springer, Singapore, 221-233, 2022 | SCI | |
| 13 | 5 | Behavior of some natural fiber composites | Hybrid Natural Fiber Composites, Woodhead Publishing, 167-183, 2021/1/1 | SCI | |
| 14 | 6 | Determination of Impact and Hardness Properties of Neem-Kenaf Fiber Reinforced Polymer Composites | Advances in Materials and Manufacturing Engineering, Springer, Singapore, 293- 302,2021. | SCI | |
| 15 | 7 | Study on Wear and Corrosion Behaviour of Aluminium Hybrid MMC | Advances in Materials and Manufacturing Engineering, Springer, Singapore, 303- 314,2021. | SCI | |
| 16 | 8 | Investigation of Flexural Strength of Abaca and Neem Twisted Natural Fiber Composites | Advances in Mechanical Engineering and Technology, Springer Publisher, pp 333-338. Published on 23-3-3022 | Scopus | |
| 17 | 9 | Investigation of tensile, yield, endurance and hardness behaviour of AZ-91 magnesium alloy CNTs composites | AIP Conference Proceedings, Volume 2464, Issue 1, Published on: 26-5-2022 | UGC | |
| 18 | 1 | Dr.C. Elanchezhian | Effect of brown rice husk α-Si3N4 on Ni–P composite coating of austenitic AISI 316L steel: Taguchi grey relational approach | Biomass Conversion and Biorefinery, Springer Berlin Heidelberg, 1-10, 2022/1/3 | SCI |
| 19 | 2 | Dynamic and Ballistic Performance of Glass/Carbon Fibre/Aluminium 1100 Wire Mesh Reinforced Composite | Surface Review and Letters, World Scientific Publishing Company, 2022/2/21 | SCI | |
| 20 | 3 | Sensitivity Analysis for Welding Parameters in Dissimilar Friction Stir Welded Joints Using Response Surface Methodology | Advances in Materials and Manufacturing Engineering, Springer, Singapore, 345- 353,2021. | SCI | |
| 21 | 4 | Experimental Investigation of Welding Parameters on Microhardness and Tensile Behaviour of Similar and Dissimilar Submerged FSWed Aluminium Alloy Joints | Advances in Materials and Manufacturing Engineering, Springer, Singapore, 355- 363,2021. | SCI | |
| 22 | 1 | Dr. A. Abdul Rahman | Morphometric assessment of hydrogeomorphic processes and landscape evolution in the Kallar watershed (Western Ghats, India): regionalisation and prioritisation | Arabian Journal of Geosciences, Springer International Publishing, 2021/9 | SCI |
| 23 | 1 | Dr. N. Mani | Life prediction of steam generator shell nozzle junction for ast breeder reactor | Materials Today: Proceedings, Elsevier, 2022/3/3 | Scopus |
| 24 | 2 | A Review on the Sustainability Prospects of Bio Fibre Reinforced Composite Materials | Bio-Fiber Reinforced Composite Materials, Springer, Singapore, 361-374,2022 | Scopus | |
| 25 | 1 | Dr. L. Saravana Kumar | Assessment of performance and emission characteristics of an off-highway vehicle engine fuelled with renewable fuel blends | International Journal of Ambient Energy, Taylor & Francis,1-11, 2021/12/3 | Scopus |
| 26 | 1 | Dr. R. Ashok Gandhi | Performance of Waste Insulating Mineral Oil-Based Biodiesel in a Direct-Injection CI Engine | International Journal of Automotive and Mechanical Engineering,18,4, 9349–9361- 9349–9361,2021 | Scopus |
| 27 | 1 | Dr.V.M.Manickavasagam | Parameters optimization of dissimilar friction stir welding for AA7079 and AA8050 through RSM | Advances in Materials Science and Engineering, Hindawi,2021, 2021/7/17 | SCI |
| 28 | 2 | Investigation of mechanical properties of sansevieria cylindrical fiber/polyester composites | Advances in Materials Science and Engineering, Hindawi,2021, Feb 2022 | SCI | |
| 29 | 1 | Mr. V. Ravi Raj | Time dependent behaviour of PMMA- toughened siliconized SiC strengthened glass-epoxy composite | Silicon, Springer Netherlands, 1- 10, 2021/6/15 | SCI |
| 30 | 2 | The compressive properties of AZ92A magnesium alloy containing titanium were studied by varying the hot-pressing and annealing temperature ranges | Materials Today: Proceedings, Elsevier, 2022/2 | Scopus | |
| 31 | 1 | Dr.S.Arun Prasad | Optimization of Injection Pressure on Performance and Emission Characteristics of Diesel Engine Using Waste Cooking Oil | Journal of Physics: Conference Series, IOP Publishing, 2021/10/1 | Scopus |
| 32 | 2 | Design And Development Of Braces For Flat Foot Ankle Injury Using Solid Works | Ilkogretim Online - Elementary Education Online, 2021 | UGC | |
| 33 | 1 | Mr. S. Ravindran | Mechanical strength and fatigue fracture analysis on Al-Zn-Mg alloy with the influence of creep aging process | Advances in Materials Science and Engineering, Hindawi, 2021/7/31 | SCI |
| 34 | 1 | Mr. R. Bhoopathi | Carbon substrates: a review on fabrication, properties and applications | Carbon Letters, Springer Singapore,31,4, 2021/8 | SCI |
| 35 | 2 | Mr. R. Bhoopathi | A Critical Review on Wood-Based Polymer Composites: Processing, Properties, and Prospects | Polymers,14,3,589, 2022/1/31 | SCI |
| 36 | 1 | Mr. S. Krishnaraj | Aerodynamic Analysis of Hybrid Drone | IOP Conference Series: Materials Science and Engineering, 2021 IOP Conf. Ser.: Mater. Sci. Eng. 1012 012023 | Scopus |
| 37 | 2 | Analysis of Parametric Effect on Domex Steel using Plasma Arc Machining Process | Materials Today: Proceedings, 2021 | Scopus | |
| 38 | 1 | Mr. R. Senthil Kumar | Optimization of One Way Tesla Valve | SAE Technical Paper, 2021/10/1 | Scopus |
| 39 | 2 | Effect of aerodynamic design on hybrid Drone | IOP Conference Series: Materials Science and Engineering, 2021 | Scopus | |
| 40 | 1 | Mr.K. VetrivelMurugan | Liquid Crystal Display (LCD) and Organic Light Emitting Diode (OLED) Applications on Natural Fibre Reinforced Polymer Matrix Composites | Advances in Materials Science and Engineering, Hindawi, 2021/11/26 | SCI |
| 41 | 2 | Analysis of Structural, Optical, and Aquaphobic Properties of Zirconium Oxide Nanofilms by Varying Sputtering Gas | Advances in Materials Science and Engineering, Hindawi, 2022/1/30 | SCI | |
| 42 | 3 | An overview on role of unconventional machining processes on different materials | Materials Today: Proceedings, 2021/9/8 | Scopus | |
| 43 | 4 | Wear behavior analysis of vitallium metal matrix composite | Materials Today: Proceedings, Elsevier, 2022/1/1 | Scopus | |
| 44 | 1 | Mr. M. Sudhakar | Investigation on tensile behaviour of Al/Si3N4/sugarcane ash particles reinforced FSP composites | Materials Today: Proceedings, 2021/12/23 | Scopus |
| 45 | 2 | Sensorless Speed Contorl of Doubly-Fed Induction Machine Using Reactive Power Based MRAS | Journal of Physics: Conference Series, 2022 | Scopus | |
| 46 | 3 | An investigation on synthesis, aggregation, and mechanical properties of Al 6082 nanocomposites reinforced by Titanium carbide | Materials Today: Proceedings, Elsevier, 2022/2/21 | Scopus | |
| 47 | 4 | Fabrication of Al-Zr -Mg-Ni matrix composite with TiC reinforcement by multi-pass recursive friction stir processing and its characterization | Materials Today: Proceedings, Elsevier, 2022/2/16 | Scopus | |
| 48 | 1 | Mr. M. Murugan | An overview on characteristics and performance of ultrasonic welding process on different materials | Materials Today: Proceedings, 2021/10/20 | Scopus |
| 49 | 1 | Mr. D. Prabu | Design and fabrication of solar water distillation with conventional solar still | Journal of Physics: Conference Series, 2021/10/1 | Scopus |
| 50 | 1 | Mr. P. VijayaRajan | Automation in communication system for automobiles using Arduino | AIP Conference Proceedings, 2021 | Scopus |
| 51 | 1 | Mr.S. Siva Chandran | Effect of tool profile influence in dissimilar friction stir welding of aluminium alloys (AA5083 and AA7068) | Advances in Materials Science and Engineering , Hindawi, 2021/7/22 | SCI |
| 52 | 1 | Mr.E.VetreSelvan | Assesment of mechanical properties of kenaf-kevlar composites made by hand lay- up technique | International journal of mechanical engineering | Scopus |
| Sl. No | No of Papers | Author | Title of Paper | Source | SCI/Scopus/ UGC |
|---|---|---|---|---|---|
| 1 | 1 | Dr. A. Rajendra Prasad | Effect of Design Parameters on Fresh Water Produced from Triangular Basin and Conventional Basin Solar Stil | International Journal of Photoenergy, Article ID 6619138, 2021/3/21 | SCI |
| 2 | 2 | Study on natural fiber composites of jute, pine apple and banana compositions percentage of weight basis for thermal resistance and thermal conductivity | Materials Today: Proceedings, Elsevier, Volume 37, Pages 147- 151, 2021/1/1 | Scopus | |
| 3 | 3 | Influence of fins on the absorber plate of tubular solar still-an experimental study | Materials Today: Proceedings, Elsevier, Volume 46, Pages 3270- 3274, 2021/1/1 | Scopus | |
| 4 | 4 | Study about emissivity of black chromium (BCr) coated aluminium alloy surface | Materials Today: Proceedings, Elsevier, Volume 37, Pages 1239- 1242, 2021/1/1 | Scopus | |
| 5 | 5 | Experimental exploration on emissivity of black chromium coating thickness analysis on copper alloy surface | Materials Today: Proceedings, Elsevier, Volume 37, Pages 137- 141, 2021/1/1 | Scopus | |
| 6 | 6 | Experimental investigation on emissivity of 75Ni-25Cr alloy coated Aluminium surface for the purpose of solar applications | Materials Today: Proceedings, Elsevier, Volume 37, Pages 1320- 1323, 2021/1/1 | Scopus | |
| 7 | 1 | Dr. B. VijayaRamnath | A Review On Friction Stir Welding And It’s Processes | IOP Conference Series: Materials Science and Engineering,OCT, 2020 Conf. Ser.: Mater. Sci. Eng. 923 012030 | Scopus |
| 8 | 2 | Wear behaviour of foam and fiber based sandwich composite–A reviews | Materials Today: Proceedings, Elsevier, Volume 46, Pages 3919- 3923, 2021/1/1 | Scopus | |
| 9 | 3 | A review on aluminium metal matrix composites | Materials Today: Proceedings, Elsevier, Volume 46, Pages 4341- 4343, 2021/1/1 | Scopus | |
| 10 | 4 | Investigations of Flexural and Hardness Behaviour of Graphene Composites | IOP Conference Series: Materials Science and Engineering,OCT, 2020 IOP Conf. Ser.: Mater. Sci. Eng. 954 012004 | Scopus | |
| 11 | 5 | Mechanical and thermal properties of PVC and polyurethane foam hybrid composites | Materials Testing, De Gruyter,62,5, 544-552, 2020/10/1 | SCI | |
| 12 | 6 | Investigations of Compression and Impact Behaviour of Hemp - Graphene Composites | EasyChair Preprint, July 6, 2020 | Scopus | |
| 13 | 7 | Investigation of Tensile Behaviour of Graphene Composites | EasyChair Preprint, July 1, 2020 | Scopus | |
| 14 | 1 | Dr.C. Elanchezhian | Development of Portable Sugarcane Harvester | IOP Conference Series: Materials Science and Engineering, OCT, 2020 IOP Conf. Ser.: Mater. Sci. Eng. 954 012030 | Scopus |
| 15 | 2 | Friction Stir Welding and Friction Stir Processing of Dissimilar Alloys: A Review | IOP Conference Series: Materials Science and Engineering, OCT, 2020 IOP Conf. Ser.: Mater. Sci. Eng. 954 012046, 2020/10/1 | Scopus | |
| 16 | 3 | Evaluation of mechanical behavior for animal fiber Reinforced hybrid fiber composite for marine application | IOP Conference Series: Materials Science and Engineering, OCT, 2020 IOP Conf. Ser.: Mater. Sci. Eng. 954 052012, 2020/8/1 | Scopus | |
| 17 | 4 | Comparative study of mechanical and morphological analysis of NaOH treated and untreated banana fiber reinforced with epoxy hybrid composite | Materials Today: Proceedings, Elsevier, Volume 39, Pages 861- 867, 2021/1/1 | Scopus | |
| 18 | 5 | Wear evaluation and microstructure analysis of cryogenically treated AISI 440C Bearing steel | Transactions of the Canadian Society for Mechanical Engineering, Canadian Science Publishing, 1-13, 2021/4/15 | SCI | |
| 19 | 1 | Prof. M. Suresh | Simple study on behaviour of composites with augmentation ofSilicon carbide on Al6061 aluminium alloy based onmechanical properties | Materials Today: Proceedings, September 2020 | Scopus |
| 20 | 1 | Dr. N. Mani | Mechanical and microstructural analysis of Al-W-Sn metal matrix composites | AIP Conference Proceedings 2283, 020022 (2020); https://doi.org/10.1063/5.0024 902 Published Online: 29 October 2020 | Scopus |
| 21 | 2 | Investigation on mechanical behaviour of Al-6061 SiC Metal Matrix with Ni composite | IOP Conference Series: Materials Science and Engineering, OCT, 2020 IOP Conf. Ser.: Mater. Sci. Eng. 954 012126, 2020/12/1 | Scopus | |
| 22 | 1 | Dr. L. Saravana Kumar | Experimental investigations of a single cylinder four stroke diesel engine using modified piston bowl fuelled with Jojoba biodiesel blend | Materials Today: Proceedings, Elsevier, Volume 46, Pages 9844- 9849, 2021/1/1 | Scopus |
| 23 | 1 | Dr. R. Ashok Gandhi | Design and development of sail type wind turbine with solar panel | Materials Today: Proceedings 2020 | Scopus |
| 24 | 1 | Mr. V. Ravi Raj | Study on nano particles of aluminium oxide and magnesium oxide used counter flow heat exchanger heat transfer, effectiveness enhancement | Materials Today Proceedings, Elsevier, 2020/9 | Scopus |
| 25 | 2 | Mechanical, thermal and wear behavior of SiC particle strengthening of PMMA-toughened glass-epoxy hybrid composite | Silicon, Springer Netherlands, 1925-1932, July 2020 | SCI | |
| 26 | 3 | Mechanical and corrosion resistant properties of nitrided low carbon steel | Materials Today Proceedings, Elsevier Publishing Ltd., 2021/1/1 | Scopus | |
| 27 | 1 | Dr.S.Arun Prasad | Multi response Optimization of Welding Parameters in Dissimilar Plasma Arc Welded Joints Using RSM Based GRA Coupled with PCA | IOP Conference Series: Materials Science and Engineering, 2020/10/1 | Scopus |
| 28 | 2 | Performance and Emission Characteristics of CI Engine using Jatropha and Pongamia Mixed Biodiesel | IOP Conference Series: Materials Science and Engineering, 2020/10/1 | Scopus | |
| 29 | 3 | Numerical and experimental evaluation on the pooled effect of waste cooking oil biodiesel/diesel blends and exhaust gas recirculation in a twin-cylinder diesel engine | Fuel, Elsevier, 2021/3/1 | SCI | |
| 30 | 1 | Mr. S. Ravindran | Determination and investigation of mechanical behaviour on kenaf-sisal hybrid composite | GIS science Journal,2020 | UGC |
| 31 | 1 | Ms. A. Dhanalakshmi | Heat transfer enhancement analysis of AlO and MgO through counter flow in heat exchanger | Materials Today: Proceedings, September 2020 | Scopus |
| 32 | 1 | Mr. R. Bhoopathi | Influence of eggshell nanoparticles and effect of alkalization on characterization of industrial hemp fibre reinforced epoxy composites | Journal of Polymers and the Environment, Springer US, 2020/8 | SCI |
| 33 | 2 | Optimization of drilling output responses of eggshell fillers reinforced hemp/glass fibres hybrid composites | Materials Today: Proceedings, Elsevier, Volume 46, Pages 3245- 3250, 2021/1/1 | Scopus | |
| 34 | 3 | Influence of Haritaki (Terminalia chebula) nano-powder on thermo-mechanical, water absorption and morphological properties of Tindora (Coccinia grandis) tendrils fiber | Journal of Natural Fibers, Taylor & Francis, 2021/5/24 | SCI | |
| 35 | 1 | Mr. S. Krishnaraj | RA-Solar Herbal Decoction Extractor | SAE Technical Paper, 2020/9/25 | Scopus |
| 36 | 2 | Analysis and optimization of hot extrusion process on strenx steel 900 | Materials Today: Proceedings, Elsevier, Volume 47, Pages 4177- 4180, April 2021 | Scopus | |
| 37 | 1 | Mr. V. Pandyaraj | Experimental investigation on flexural behaviour of spherical core sandwich structure | Journal of reinforced plastic composite, 2021/2 | SCI |
| 38 | 1 | Mr. R. Senthil Kumar | Ra–Solar decoction (Herbal) extractor | SAE Technical Paper, 2020/9/25 | Scopus |
| 39 | 2 | Analysis of formability and optimization on nickel coated stainless steel sheet | Materials Today: Proceedings, 2021/2/26 | Scopus | |
| 40 | 3 | Evaluation of hardness and analysis of parameters on reinforced Al-MMC | Materials Today: Proceedings, 2021/1/1 | Scopus | |
| 41 | 1 | Mr. T. Ganesh | Synthesize and wet condition based characterizations of GRP / Lye treated sisal fiber hybrid composite | Materials Today: Proceedings, June 2020 | Scopus |
| 42 | 1 | Mr.K. VetrivelMurugan | Experimental investigation and comparative assessment of PVD and CVD insert on dry machining of waspaloy | Materials Today: Proceedings Available online 18 February 2021 https://doi.org/10.1016/j.matpr .2020.12.1208 | Scopus |
| 43 | 1 | Dr. S. Rajesh | Multi Component Drill Jig for Brake Lining Component | Materials Today: Proceedings, 2021/1/1 | Scopus |
| 44 | 1 | Mr. R. Rajaprasanna | Characterization on hybrid of caustic treated natural and glass fibre composites | Materials Today: Proceedings, Available online 16 sep 2020 | Scopus |
| 45 | 1 | Mr. M. Sudhakar | Experimental investigation regarding emissivity of black nickel coated on aluminium surface | Materials Today: Proceedings, 2021/1/1 | Scopus |
| 46 | 2 | Mechanical and thermal properties of jute/ aloevera hybrid natural fibber reinforced composites | AIP conference proceedings, Oct 2020 | Scopus | |
| 47 | 1 | Mr. S. Ganapathy | Process parameter optimization on EN8 steel in Electric Discharge Machining (EDM) using Response Surface Methodology (RSM) Technique | IOP Conference Series: Materials Science and Engineering, 2020/12/1 | Scopus |
| 48 | 2 | Multi-response Optimization of Machining Parameters in EDM Using Square-Shaped Nonferrous Electrode | Advances in Manufacturing Processes, Lecture Notes in Mechanical Engineering, https://doi.org/10.1007/978- 981-13-1724-8_28 | Scopus | |
| 49 | 3 | Comparative investigation of Artificial Neural Network (ANN) and Response Surface Methodology (RSM) expectation in EDM parameters | Materials Today: Proceedings, 2021/1/1 | Scopus | |
| 50 | 4 | Evaluation of welding strength and optimization on seam welding of domex steel | Materials Today: Proceedings, 2021/3 | Scopus | |
| 51 | 1 | Mr. S.K. Dinesh Kumar | Mechanical and thermal properties of jute/ aloevera hybrid natural fiber reinforced composites | Cite as: AIP Conference Proceedings 2283, 020084 (2020); https://doi.org/10.1063/5.0024 976 Published Online: 29 October 2020 | Scopus |
| 52 | 2 | Investigation on synthesize and characterizations hybrid composite with treated banana fibers | AIP Conference Proceedings, 2020/10/29 | Scopus | |
| 53 | 1 | Mr. A. Ravinthiran | Flow variations and comparisons of heat exchanger headers with different cross sections | AIP Conference Proceedings 2283, 020002 (2020); https://doi.org/10.1063/5.0029 256 Published Online: 29 October 2020 | Scopus |
| 54 | 2 | Design, Analysis and Development of Epoxy Resin made Omnidirectional Wind Turbine | IOP Conference Series: Materials Science and Engineering, 2020/12/1 | Scopus | |
| 55 | 1 | Mr. T. Babu | A modern low-cost furrow cutting machine | AIP Conference Proceedings 2283, 020001 (2020); https://doi.org/10.1063/5.0025 075 Published Online: 29 October 2020 | Scopus |
| 56 | 2 | Teaser glove for women safety | IOP Conference Series: Materials Science and Engineering, 2020/12/15 | Scopus | |
| 57 | 1 | Mr. L. Ravikumar | Design and analysis of all terrain vehicle chassis using finite element analysis | AIP Conference Proceedings 2283, 020093 (2020); https://doi.org/10.1063/5.0025 061 Published Online: 29 October 2020 | Scopus |
| 58 | 2 | Analytical and Numerical Approach on Design of Cageless Open Differential Unit | IOP Conference Series: Materials Science and Engineering, 2020 IOP Conf. Ser.: Mater. Sci. Eng. 988 012043 | Scopus | |
| 59 | 1 | Mr. D. Prabu | Design and development of a prototype thermal power plant for recycling of sea water by distillation process | IOP Conf. Series: earth and environmental science ,2020 | Scopus |
| 60 | 1 | Mr. S. Ramanathan | Flow analysis of abrasive micro-blasting with glycerol and acrylamideas carrier medium using computational fluid dynamics | IOP Conf. Series: Materials Science and Engineering 912 (2020) 032011 | Scopus |
| 61 | 1 | Mr. M. Raajasekar | Experimental investigation of tensile strength and tensile modulus of fiber reinforced polyester by using chicken feather fiber | AIP Conference Proceedings 2283, 020077 (2020); https://doi.org/10.1063/5.0025 091 Published Online: 29 October 2020 | Scopus |
| 62 | 1 | Mr.S. Siva Chandran | Experimental investigation on three combinations of magnesium oxide and silicon carbide used composites of Al6463 aluminium alloy | Materials Today: Proceedings, 2021/1/1 | Scopus |
| Sl. No | No of Papers | Author | Title of Paper | Source | SCI/Scopus/UGC |
|---|---|---|---|---|---|
| 1 | 1 | Dr. A. Rajendra Prasad | Heat transfer enhancement analysis of Al2O3 and mgo through counter flow in heat exchanger | Materials Today: Proceedings. Volume 33, Part 7, 2020, Pages 4412- 4416. | Scopus |
| 2 | 2 | Study of storage modulus, lose modulus and abrasion on fiber reinforced polyester composites with locally available fiber of chicken feathers | AIP Conference Proceedings, 2283, 020078 (2020) | Scopus | |
| 3 | 3 | Synthesis and Thermal Energy Storage Analysis of Copper Oxide Nano fluid for Heat Transfer Applications | International Journal of Innovative Technology and Exploring Engineering (IJITEE) ISSN: 2278- 3075, Volume-8 Issue-11, September 2019, pp. 3616 | Scopus | |
| 4 | 1 | Dr. B. VijayaRamnath | Prediction of mechanical properties of Al6061 metal matrix composites reinforced with zircon sand and boron carbide | Materials Testing, De Gruyter,61,6, 537-542, 2019/6/1 | SCI |
| 5 | 2 | Evaluation of mechanical properties of sugarcane reinforced hybrid natural fibre composites by conventional fabrication and finite element method | Key Engineering Materials, Trans Tech Publications Ltd, 841, 327- 334,2020 | Scopus | |
| 6 | 3 | Review on sandwich composite and their applications | Materials Today Proceedings,2019 Pg.-859-864 doi: 10.1016/j.matpr.2019.05.169 | Scopus | |
| 7 | 4 | Mechanical properties of boehmeria nivea reinforced polymer composite | Materials Today Proceedings,2019 Pg.-883-888 doi: 10.1016/j.matpr.2019.05.173 | Scopus | |
| 8 | 5 | Mechanical Characterization of Natural Fiber Polymer Composites | Materials Today Proceedings,2019 Pg.- 1006-1012 doi: 10.1016/j.matpr.2019.05.189 | Scopus | |
| 9 | 6 | Mechanical behaviour of natural and glass fiber reinforced with polymer matrix composite | Materials Today Proceedings,2019 Pg.-1297-1303 doi: 10.1016/j.matpr.2019.05.227 | Scopus | |
| 10 | 7 | Experimental evaluation on Mechanical Properties of Natural Fiber Polymer Composites with Human Hair | Materials Today Proceedings,2019 Pg.- 1304-1311 doi: 10.1016/j.matpr.2019.05.228 | Scopus | |
| 11 | 8 | A review on sandwich composites and their advancements | Materials Today Proceedings,2019 Pg.-1146-1151 doi: 10.1016/j.matpr.2019.05.207 | Scopus | |
| 12 | 1 | Dr.C. Elanchezhian | Wind effects of an upstream Building on a low-rise Building | Materials Today Proceedings,2019 Pg.- 444-448 doi: 10.1016/j.matpr.2019.05.113 | Scopus |
| 13 | 2 | Relationship between fracture toughness and specimen thickness for Quasi isotropic titanium epoxy laminates. | Materials Today Proceedings,2019 Pg.- 865-869 doi: 10.1016/j.matpr.2019.05.170 | Scopus | |
| 14 | 3 | Implementation of Lean manufacturing in Indian smes A case study | Materials Today Proceedings,2019 Pg.-1244-1250 doi: 10.1016/j.matpr.2019.05.221 | Scopus | |
| 15 | 4 | Hybrid Fuzzy based response surface optimization of welding parameters on Vickers micro hardness and impact strength of fswed AA8011 H24 aluminium alloy joints. | Materials Today Proceedings,2019 doi: 10.1016/j.matpr.2019.05.412 | Scopus | |
| 16 | 5 | Experimental investigation of natural and synthetic hybrid composite for marine applications | Materials Today Proceedings,2019 doi: 10.1016/j.matpr.2019.05.334 | Scopus | |
| 17 | 6 | Experimental investigation of banana bract fiber and palm fiber reinforced with epoxy hybrid composites. | Materials Today Proceedings,2019 doi: 10.1016/j.matpr.2019.05.633 | Scopus | |
| 18 | 7 | An integrated approach in selecting best supplier selection process in supply chain management using MAT LAB- A review | Materials Today Proceedings,2019 Pg.-1350-1356doi: 10.1016/j.matpr.2019.05.235 | Scopus | |
| 19 | 8 | Experimental Investigation Kevlar composite for Marine application-A Review | Recent Trends in Production Engineering,3,1, 2020/4/18 | Scopus | |
| 20 | 9 | Evaluation of Mechanical Properties of AZ31 Magnesium Alloy Calcium oxide Metal matrix composite | Advancement in Mechanical Engineering and Technology,3,1, 2020/4/5 | Scopus | |
| 21 | 10 | Experimental investigation of banana bract fiber and palm fiber reinforced with epoxy hybrid composites | Materials Today: Proceedings. Volume 22, Part 7, 2020, Pages 335- 341, 2020/1/1 | Scopus | |
| 22 | 11 | Experimental investigation of natural and synthetic hybrid composite for marine application | Materials Today: Proceedings. Volume 22, Part 7, 2020, Pages 322- 329, 2020/1/1 | Scopus | |
| 23 | 12 | Hybrid Fuzzy based response surface optimization of welding parameters on Vickers microhardness and impact strength of fswed AA8011-H24 aluminium alloy joints | Materials Today: Proceedings. Volume 23, Part 7, 2020, Pages 573- 582, 2020/1/1 | Scopus | |
| 24 | 1 | Prof. M. Suresh | Effect of Sea Water Environment Exposure on Glass Fiber Reinforced Polymer Composites | International Journal of Innovative Technology and Exploring Engineering, ISSN: 2278-3075, Volume-9 Issue-1, November, 2019 | Scopus |
| 25 | 2 | Physical and physiological Characteristics of subjects participated In experiments on weeding | International Journal of Research and Analytical Reviews, May 2019, Volume 6, Issue 2 | UGC | |
| 26 | 1 | Dr. A. Abdul Rahman | Natural and human-induced land degradation and its impact using geospatial approach in the kallar watershed of tamil nadu, india | Geography, Environment, Sustainability,2020 | SCI |
| 27 | 1 | Dr. N. Mani | Influence of Rutile Nano tio2 on Thrust Force, Mechanical, Wear and Microstructural Behavior of Al–sic Composites | Nanoscience and Nanotechnology Letters,Vol. 11, 1502–1512, 2019, American Scientific Publishers | UGC |
| 28 | 2 | Design and Development of Electric Tri- Wheeler | International Journal of Engineering Research in Computer Science and Engineering, Vol 6, Issue 7, July 2019, ISSN 2394- 2320 | UGC | |
| 29 | 1 | Mr. G. Ramakrishnan | Experimental Research on Hybrid Natural/Glass fiber based epoxy composite | International Journal of Engineering and Advanced Technology (IJEAT) ISSN: 2249 – 8958,2019 | Scopus |
| 30 | 2 | Enhancing heat transfer rate in heat exchanger using nano particles of the natural Glay | Materials Today: Proceedings 33 (2020) 4402–4407 https://doi.org/10.1016/j.matpr.202 0.07.661 | Scopus | |
| 31 | 1 | Dr. L. Saravana Kumar | Validation of performance and emissions of a CI engine fueled with calophylluminophyllum methyl esters using soft computing technique | Fuel 266 (2020) 117070, Elsevier | SCI |
| 32 | 2 | Utilization of coconut shell pyrolysis oil diesel blends in a direct injection diesel engine | Materials Today: Proceedings, Elsevier, Volume 45, Pages 713-717, March 2020 | Scopus | |
| 33 | 1 | Dr. N. Vasudevan | Investigation On Corrosion Behavior of Cryogenically Treated Friction Stir Welded AA5083 | ISSN 1392-1207. MECHANIKA. 2020 Volume 26(5): 442-449 | SCI |
| 34 | 2 | Mechanical properties of cryogenically treated AA5083 Friction stir welds | Materials Testing For Welding And Additive Manufacturing Applications , 61 (2019) 12 c Carl HanserVerlag, Munchen, Materials Testing | SCI | |
| 35 | 3 | Corrosion study on AA5083 aluminum alloy - boron carbide Composite | Materials Today: Proceedings 16 (2019) 1124–1129 | Scopus | |
| 36 | 1 | Dr. K. Venkatraman | Design Optimization of an Automotive Component in Product Development | International Journal of Engineering and Advanced Technology (IJEAT) ISSN: 2249 – 8958, Volume-9 Issue-1, October 2019 | Scopus |
| 37 | 1 | Dr.V.M.Manickavasagam | Mechanical characteristics and wear behavior of hybrid Composites with areca and neem fibers | International Journal of Mechanical and Production Engineering Research and Development (IJMPERD) ISSN(P): 2249–6890; ISSN(E): 2249–8001 Vol. 10, Issue 1, Feb 2020, 375–388 | Scopus |
| 38 | 1 | Mr. V. Ravi Raj | Nature Inspired Design of a Connecting Rod using the Longitudinal Section of Palm Tree | International Journal of Engineering and Advanced Technology (IJEAT) ISSN: 2249 – 8958, Volume-9 Issue-2, December, 2019, DOI: 10.35940/ijeat.B3210.129219 | Scopus |
| 39 | 2 | Experimental Research on Roselle / Glass Fibre Hybrid Polymer Composites | International Journal of Innovative Technology and Exploring Engineering (IJITEE) ISSN: 2278- 3075, Volume-9 Issue-1, November 2019 DOI: 10.35940/ijitee.A2212.119119 | Scopus | |
| 40 | 3 | Machining Process Parameters on Green Composite Material | International Journal of Innovative Technology and Exploring Engineering (IJITEE) ISSN: 2278- 3075, Volume-9, Issue-1, November 2019, DOI: 10.35940/ijitee.A4150.119119 | Scopus | |
| 41 | 4 | Friction and Wear Properties of Polymeric Composite Materials for Bearing Applications | International Journal of Innovative Research in Technology, ISSN: 2349 – 6002,Volume 6 Issue 11 , April 2020 | UGC | |
| 42 | 5 | Design, Analysis and Fabrication of Hybrid Human Powered Tricycle | International Journal for Research in Applied Science & Engineering Technology (IJRASET) ISSN: 2321- 9653; IC Value: 45.98; SJ Impact Factor: 7.177 Volume 8 Issue II Feb 2020 | UGC | |
| 43 | 6 | Mechanical Properties of Hybrid Polymers for Break pad Applications. | IOP Conf. Series: Materials Science and Engineering 961 (2020) 012004 IOP Publishing doi:10.1088/1757- 899X/961/1/012004 | Scopus | |
| 44 | 7 | A Review on Automobile Gear Transmission Mechanism | International Research Journal of Engineering and Technology (IRJET), Volume: 07 Issue: 02 | Feb 2020 | UGC | |
| 45 | 1 | Dr. R. Ashok Gandhi | Role of Calcium Carbonate(caco3) in improving wear resistance of Polypropylene(PP) components used in automobiles | Materials Today: Proceedings 16 (2019) 1363–1371 | Scopus |
| 46 | 2 | Nano indendation hardness testing of pp-cnt composites | Materials Today: Proceedings 16 (2019) 1372–1377 | Scopus | |
| 47 | 3 | Effect of Carbon Nano Tubes(CNT) on Hardness of polypropylenematrix | Advances in Materials and Metallurgy, Lecture Notes in Mechanical Engineering, https://doi.org/10.1007/978-981- 13-1780-4_26, Springer Nature Singapore Pte Ltd. 2019 | Scopus | |
| 48 | 1 | Dr. M. Arul Prakash | Flow Analysis of Laminar Wall Jet over Curved Cavity with a Channel Mounted Fin | International Journal of Recent Technology and Engineering (IJRTE) ISSN: 2277-3878, Volume-8 Issue-3, September 2019 | Scopus |
| 49 | 2 | Battery Thermal Management System Using Phase Change Material on Trapezoidal Battery Pack with Liquid Cooling System | International Journal of Advanced Science and Technology Vol. 29, No. 5, (2020), pp. 5288 – 5300 | Scopus | |
| 50 | 3 | Development of Ultrasonic Sensor Based Automatic Braking System | International Journal of Engineering Research in Computer Science and Engineering,6,7, 117 – 124, 2019/7 | UGC | |
| 51 | 1 | Dr.S.Arun Prasad | Evaluation of mechanical properties of magnesium [az91] reinforced with carbon nanotubes and sic/al2o3 | Ilkogretim Online - Elementary Education Online, 2020 | UGC |
| 52 | 1 | Mr. S. Ravindran | Mechanical Behaviour of Aluminium Hybrid Metal Matrix Composites – A Review | Materials Today: Proceedings 16 (2019) 1020–1033 | Scopus |
| 53 | 2 | Evaluation Of Process Parameters Of Friction Stir Welding Using Dissimilar Materials Of Aluminium Alloys 6061 & 6082 | THINK INDIA (Quarterly Journal), ISSN: 0971-1260 Vol-22-Issue-2- April-June-2019 | UGC | |
| 54 | 3 | Wear testing of polypropylene terminachebula fibres | IOP Conference Series: Materials Science and Engineering, 2020 IOP Conf. Ser.: Mater. Sci. Eng. 912 052024 | Scopus | |
| 55 | 1 | Ms. A. Dhanalakshmi | Experimentation of Emission Control on a Four Stroke Diesel Engine using an Eco- Friendly Silencer with Excess Air | International Journal of Recent Technology and Engineering (IJRTE) ISSN: 2277-3878, Volume-8 Issue-4, November 2019 | Scopus |
| 56 | 1 | Mr. R. Bhoopathi | Fabrication of Automated Scrap Collector Cum Scrubber for Production Industries | Advances in Manufacturing Technology, Lecture Notes in Mechanical Engineering, https://doi.org/10.1007/978-981- 13-6374-0_18, Springer Nature Singapore Pte Ltd. 2019 | Scopus |
| 57 | 2 | Mechanical Properties’ Evaluation of Hemp Fibre-Reinforced polymercomposites | Advances in Materials and Metallurgy, Lecture Notes in MechanicalEngineering, https://doi.org/10.1007/978-981- 13-1780-4_33, Springer Nature Singapore Pte Ltd. 2019 | Scopus | |
| 58 | 3 | Experimental investigation on morphological, physical and shear properties of hybrid compositelaminates reinforced with flax and carbon fibres | Journal of the Chinese Advanced Materials Society, Taylor and Francis, 2019. DOI: 10.1080/22243682.2018.1534609 | SCI | |
| 59 | 4 | Influence of eggshell particles on mechanical and water absorption properties of hemp- glass fibres reinforced hybrid composites | IOP Conf. Series: Materials Science and Engineering 923 (2020) 012042 | Scopus | |
| 60 | 1 | Mr. S. Krishnaraj | Automatic solar panel tracking system | International Journal of Innovative Technology and Exploring Engineering (IJITEE) ISSN: 2278- 3075, Volume-9 Issue-1, November 2019 | Scopus |
| 61 | 2 | Solution for stainless steel jar crack beading while usage time | Journal of Emerging Technologies and Innovative Research, 2019 JETIR June 2019, Volume 6, Issue 6 | UGC | |
| 62 | 3 | Design and analysis of automatic solar panel cleaning system | Journal of the Gujarat research society, Dec 2019 | UGC | |
| 63 | 1 | Mr. V. Pandyaraj | Development of Flapping Panel Vertical Axis Wind Turbine | International Journal of Innovative Technology and Exploring Engineering (IJITEE) ISSN: 2278- 3075, Volume-9 Issue-1, November 2019 | Scopus |
| 64 | 2 | Experimental investigation of core shear properties and facing sheet fracture stress of spherical sandwich structure | Advances in Simulation, Product Design and Development, 2020 | Scopus | |
| 65 | 1 | Mr. R. Senthil Kumar | Impact And Hardness Characteristics of Cfrp- Kenaf-Abaca Fiber Composites | International Journal of Recent Technology and Engineering (IJRTE) ISSN: 2277-3878, Volume-8 Issue-4, November 2019 | Scopus |
| 66 | 2 | Economic harvester | International Journal of Research and Analytical Reviews, 2019 IJRAR July 2019, Volume 6, Issue 3 | UGC | |
| 67 | 3 | Compact foritos portable staircase | Journal of the Gujarat research society, Dec 2019 | UGC | |
| 68 | 4 | Evaluation of Optimum Machining Parameters by AWJM for Granite through Multi Response Methods | Materials Today: Proceedings 22 (2020) 3056–3066 | Scopus | |
| 69 | 1 | Mr. T. Ganesh | Experiments for calculating Properties of Distilled Water from Solar Still and Potable water from Reverse Osmosis Process | International Journal of Recent Technology and Engineering (IJRTE) ISSN: 2277-3878, Volume-8 Issue-4, November 2019 | UGC |
| 70 | 1 | Dr. S Rajesh | Experimental Investigation of tensile and impact behaviour of aramid natural fiber composite | Materials Today: Proceedings 16 (2019) 699–705 | Scopus |
| 71 | 1 | Mr. K. VetrivelMurugan | Fabrication and Machinability Study of Al2219 Metal Matrix Composites Reinforced with sin/mos2 Nanoparticles | SAE International, October, 2019 | Scopus |
| 72 | 2 | Experimental Study on Tool Wear and Cutting Temperature during Machining of Nimonic C-263 and Waspaloy Based on Taguchi Method and Response Surface Methodology | SAE International, October, 2019 | Scopus | |
| 73 | 3 | Experimental Investigation on Turning Characteristics of tic/mos2 Nanoparticles Reinforced Al7075 Using tin Coated Cutting Tool | SAE International, October, 2019 | Scopus | |
| 74 | 4 | Dry machining of nimonic 263 alloy using PVD and CVD inserts | Lecture notes on mechanical engineering, 2019 | Scopus | |
| 75 | 5 | Investigation of parameters for machining a difficult to machine superalloy Inconel x750 and waspaloy | Lecture notes on mechanical engineering, 2019 | Scopus | |
| 76 | 1 | Dr. C. Parswajinan | Optimization of Al-sic-MW CNT metal composite by W-EDM using Taguchi method | IOP Conference Series: Materials Science and Engineering, 2020 IOP Conf. Ser.: Mater. Sci. Eng. 954 012033 | Scopus |
| 77 | 1 | Mr. M. Sudhakar | Experimental Research on the Tribological - Mechanical Properties of Al-sic composites and EN31 Steel | International Journal of Engineering and Advanced Technology (IJEAT) ISSN: 2249 – 8958, Volume-9 Issue-2, December, 2019 | Scopus |
| 78 | 2 | Performance Improvement of Trough Concentrating Photovoltaic Thermal System: A Review | Materials Today: Proceedings 16 (2019) 647–652 | Scopus | |
| 79 | 1 | Mr. M.C. AnandChakaravarthi | Flexural, Impact and Tensile Properties of Banana/ PLA Composite | International Journal of Innovative Technology and Exploring Engineering (IJITEE) ISSN: 2278- 3075, Volume-9 Issue-1, November 2019 | Scopus |
| 80 | 2 | Experimental research on glass fibers /caustic soda treated banana fibers hybrid composite | Materials Today: Proceedings,2020,Pg.-4408-4411, volume 33 | Scopus | |
| 81 | 1 | Mr. R. Rajaprasanna | Design and Development of Ejection Seat Mechanism in Aircraft | International Journal of Innovative Technology and Exploring Engineering (IJITEE) ISSN: 2278- 3075, Volume-8 Issue-11, September 2019 | Scopus |
| 82 | 1 | Mr. S. Ganapathy | Design and Development of Multi-Purpose Wheelchair for Differently-Abled Person | Journal of Emerging Technologies and Innovative Research, June 2019, Volume 6, Issue 6 | UGC |
| 83 | 2 | ALFA: Fly Ash - Aluminium Metal Matrix Composites for Light Weight Material | International Journal of Recent Technology and Engineering (IJRTE) ISSN: 2277-3878, Volume-8 Issue-3, September 2019 | Scopus | |
| 84 | 3 | Multi Response optimization of machining parameters in EDM using square shaped nonferrous electrode | Advances in Manufacturing Processes, Lecture notes in mechanical engineering, 2019 | Scopus | |
| 85 | 1 | Mr. S.K. Dinesh Kumar | Synthesize and general characterizations of textile-grade glass fibers/malic acid treated sisal fiber hybrid composite | Materials Today: Proceedings 22, 3056–3066, 2020/1/1 | Scopus |
| 86 | 1 | Mr. A. Ravinthiran | Development and Analysis of Semi-Automatic Safety Inflation Bag | International Journal of Recent Technology and Engineering (IJRTE) ISSN: 2277-3878, Volume-8 Issue-2, July 2019 | Scopus |
| 87 | 1 | Mr. T. Babu | Sleep Detection and Alert System for Automobiles | Advances in Manufacturing Technology,2019 Lecture Notes in Mechanical Engineering, https://doi.org/10.1007/978-981- 13-6374-0_14 | Scopus |
| 88 | 2 | Framework Execution and Schematic Of Jounce Bumper in Two-Wheeler Fork | Advances in Manufacturing Technology,2019 Lecture Notes in Mechanical Engineering, https://doi.org/10.1007/978-981- 13-6374-0_56 | Scopus | |
| 89 | 1 | Mr. M. Murugan | Experimental Research on Musa Sepientum and Hen Egg Shell Hybrid Reinforced Composite Material | International Journal of Engineering and Advanced Technology (IJEAT) ISSN: 2249 – 8958, Volume-9 Issue-1, October 2019 | Scopus |
| 90 | 1 | Mr. L. Ravikumar | Reinforcing Adhesive Plastic-Coated Grins through FRP Compounds | International Journal of Engineering and Advanced Technology (IJEAT) ISSN: 2249 – 8958, Volume-9 Issue-1, October 2019 | Scopus |
| 91 | 2 | Free Vibrational Analysis of Cortical / Hard Cancellous Bone By Using of FEA | Materials Today: Proceedings 16 (2019) 744–749 | Scopus | |
| 92 | 3 | Studies on mechanical properties of sisal and jute fiber hybrid sandwich composite | Materials Today: Proceedings,2020 | Scopus | |
| 93 | 4 | An experimental investigation on wear characteristics of C-45 grade steel overlay with stellite | IOP Conference Series: Materials Science and Engineering, 2020 IOP Conf. Ser.: Mater. Sci. Eng. 988 012039 | Scopus | |
| 94 | 1 | Mr. P. VijayaRajan | Auxillary Safety Locking System of Vehicle Doors using Arduino | International Journal of Innovative Technology and Exploring Engineering (IJITEE) ISSN: 2278- 3075, Volume-9 Issue-1, November 2019 | Scopus |
| 95 | 2 | Enhancing the Insulation of Transformer Winding Using Nano-Alumina/Epoxy Composites | Solid State Technology Volume: 63 Issue: 5 Publication Year: 2020 | Scopus | |
| 96 | 1 | Mr. S. Ramanathan | Design of automatic side stand and spring compression control system using arduino programming | IOP Conf. Series: Materials Science and Engineering 912 (2020) 022010 IOP Publishing doi:10.1088/1757899X/912/2/0220 10 | Scopus |
| 97 | 2 | Flow Simulation in Abrasive Fluid Jet Machining with Water as Carrier Medium using CFD | International Journal of Innovative Technology and Exploring Engineering (IJITEE) ISSN: 2278- 3075, Volume-8 Issue-12, October, 2019 | Scopus | |
| 98 | 1 | Mr. PriyadarshiDutt | Design and Analysis of Composite Parabolic Leaf Spring Under fatigueload Condition | Advances in Manufacturing Technology,2019 Lecture Notes in Mechanical Engineering, https://doi.org/10.1007/978-981- 13-6374-0_58 | Scopus |
| 99 | 1 | Mr. N. Elangovan | Small-Scale Power Generation by Horizontal Axis Magnus Wind Turbine | International Journal of Engineering and Advanced Technology (IJEAT) ISSN: 2249 – 8958, Volume-9 Issue-2, December, 2019 | Scopus |
| 100 | 1 | Mr. D. Prabu | Mechanical Behaviour of Palm Fiber (Palmyra Spout) – Basalt Fiber - Hybrid Composites | International Journal of Innovative Technology and Exploring Engineering (IJITEE) ISSN: 2278- 3075, Volume-9 Issue-1, November 2019 | Scopus |
| 101 | 1 | Mr. E. Naveen | Thermogravimetric Analysis of Friction Welding of Dissimilar Material | Proceedings of ICDMC 2019, Lecture Notes in Mechanical Engineering, https://doi.org/10.1007/978-981- 15-3631-1_47 | Scopus |
| 102 | 2 | An investigation on wear behaviour of CNT reinforced al-sic metal matrix composites | International Journal of Mechanical and Production Engineering Research and Development (IJMPERD) ISSN(P): 2249-6890; ISSN(E): 2249-8001 Vol. 9, Issue 3, Jun 2019, 171-182 | Scopus | |
| 103 | 3 | Computational analysis of dissimilar materials engine valve: Technical note | IJOVSS,2019 | UGC | |
| 104 | 4 | Development of Hybrid Friction Material for Brake Pad Application | IOP Conference Series: Materials Science and Engineering, l 2020 IOP Conf. Ser.: Mater. Sci. Eng. 923 012039 | Scopus | |
| 105 | 1 | Mr. P. Manikandan | Water Methanol Injection based Four Stroke Single Cylinder SI Engine Using an Electronic Control Unit | International Journal of Innovative Technology and Exploring Engineering (IJITEE) ISSN: 2278- 3075, Volume-8 Issue-11, September 2019 | Scopus |
| 106 | 1 | Mr. S. Siva Chandran | Design and analysis of portable storage balloon type compact bio-gas digester | Journal of the Gujarat research society, Dec 2019 | UGC |
| 107 | 1 | Mr. M. Raajasekar | Sheet Metal Fortified Joints Formation and Assessing Mechanical Properties | International Journal of Recent Technology and Engineering (IJRTE) ISSN: 2277-3878, Volume-8 Issue-3, September 2019 | Scopus |
| 108 | 2 | Assessing mechanical properties of bonded joints on sheet metal seaming joints | International journal of innovative technology and exploring engineering, July 2019 | Scopus | |
| 109 | 1 | Mr. V. Ranjith Kumar | The mechanical and morphological analysis of carbon fiber materials | International Journal of Mechanical and Production Engineering Research and Development (IJMPERD) ISSN(P): 2249–6890; ISSN(E): 2249–8001 Vol. 9, Issue 4, Aug 2019, 1255–1262 | Scopus |
| 110 | 2 | Effect of rib arrangements on the flow pattern and heat transfer in internally ribbed rectangular divergent channels | Materials Today: Proceedings Dec 2020 | Scopus | |
| 111 | 1 | Mr. P. Anbarasu | Investigation of filler material influence on hardness of TIG welded joints | Materials Today: Proceedings,2019 | Scopus |
| 112 | 2 | Effects of filler material on hardness of MIG welded joints | Materials Today: Proceedings, 2020/1/1 | Scopus | |
| 113 | 1 | Mr.E.VetreSelv an | Experimental Research on AA 6061/SICP Composites | International Journal of Engineering and Advanced Technology (IJEAT) ISSN: 2249 – 8958, Volume-9, Issue- 2, December 2019 | Scopus |
| 114 | 2 | Determination and investigation of mechanical behaviour on kenaf-sisal hybrid composite | Materials Today: Proceedings,2020 | Scopus | |
| 115 | 3 | Sustainable development of natural fiber composite material | Materials Today: Proceedings,2020 | Scopus | |
| 116 | 1 | Mr. J. Jeyakrishnan | Optimization of process parameters in abrasive water jet machining/cutting (AWJM) of nickel alloy using traditional analysis to minimize kerf taper angle | Materials Today: Proceedings, 2019 | Scopus |
| Sl. No | No of Papers | Author | Title of Paper | Source | SCI/Scopus/ UGC |
|---|---|---|---|---|---|
| 1 | 1 | Dr. A. Rajendra Prasad | Design and development of phase change material oriented cold storage flask | International Journal of Mechanical Engineering and Technology (IJMET) Volume 9, Issue 8, Aug 2018, pp. 204-212. | Scopus |
| 2 | 2 | Design and analysis of compact boiler | International Journal of Mechanical Engineering and Technology (IJMET) Volume 9, Issue 7, July 2018, pp. 1525–1534. | Scopus | |
| 3 | 1 | Dr. B. VijayaRamnath | An investigation on mechanical behaviour of nylon 6- polycarbonate hybrid composite | International Journal of Mechanical and Production Engineering Research and Development Volume 8, Issue 6, December 2018, Article number IJMPERDDEC201856, Pages 525-532 | Scopus |
| 4 | 2 | Experimental investigation of flexural and hardness behaviour of hemp flax hybrid composite | International Journal of Mechanical and Production Engineering Research and Development 8(4),IJMPERDAUG20187, pp. 55-60 | Scopus | |
| 5 | 3 | Review on natural fiber composites | IOP Conference Series: Materials Science and Engineering 390 (1), 012065,selected from ICMME 2018 | Scopus | |
| 6 | 4 | A review on friction stir welding of aluminium metal matrix composites | IOP Conference Series: Materials Science and Engineering 390 (1), 012103 | Scopus | |
| 7 | 5 | A review on sandwich and natural fiber composites | IOP Conference Series: Materials Science and Engineering 390 (1), 012069 | Scopus | |
| 8 | 6 | Mechanical and wear behavior of aluminium-zircon sand-fly ash metal matrix composite | IOP Conference Series: Materials Science and Engineering 390 (1), 012018 | Scopus | |
| 9 | 7 | A review on natural fiber hybrid composites | International Journal of Mechanical and Production Engineering Research and Development Volume 8, Issue 3, 30 June 2018, Pages 943-948 | Scopus | |
| 10 | 8 | Experimental investigation of tensile and impact behaviour of hemp flax hybrid composite | International Journal of Mechanical and Production Engineering Research and Development8(3), IJMPERDJUN201859, pp. 549- 556 | Scopus | |
| 11 | 9 | Studies on mechanical behaviour of aluminium-silicon carbide-copper metal matrix composite | MATEC Web of Conferences 166,01001 | Scopus | |
| 12 | 10 | Investigation of micro-structure and mechanical behaviour of aluminum - zircon sand - tungsten carbide metal matrix composites | Materials Today: Proceedings Volume 5, Issue 11, 2018, Pages 25553-25561 | Scopus | |
| 13 | 11 | Sea shells and natural fibres composites: a review | Elsevier – Materials Today Proceedings selected from PMME-2016, Paper ID: EMT-439. | Scopus | |
| 14 | 12 | Design and development of milling fixture for friction stir welding | Elsevier – Materials Today Proceedings selected from PMME-2016, Paper ID: EMT-440. | Scopus | |
| 15 | 13 | Implementation of reverse engineering for crankshaft manufacturing industry | Elsevier – Materials Today Proceedings selected from PMME-2016,Paper ID: EMT-385. | Scopus | |
| 16 | 14 | Implementation of concurrent redesign & manufacture procedure for an automotive component | Materials Today: Proceedings 5 (2018) 1418–1424 | Scopus | |
| 17 | 15 | Investigation on mechanical and thermal properties of stainless steel wire mesh-glass fibre reinforced polymer composite | Silicon (2018). pp. 1-9 | SCI | |
| 18 | 16 | Studies on mechanical behaviour of basalt fiber composite | IOP Conf. Series: Materials Science and Engineering 377 (2018) 012119, International Conference on Mechanical, Materials and Renewable Energy | Scopus | |
| 19 | 17 | Wear analysis of sintered al-b4 cp composite material | Materials Today Proceedings,2019 Pg.-481-487 doi: 10.1016/j.matpr.2019.05.119 | Scopus | |
| 20 | 18 | Study on mechanical and metallurgical properties of glass fiber reinforced pmc gear material | Materials Today Proceedings,2019 Pg.-524-531 doi: 10.1016/j.matpr.2019.05.124 | Scopus | |
| 21 | 19 | Investigation of mechanical properties of aluminium 6061- silicon carbide, boron carbide metal matrix composite | Silicon Volume 10, Issue 2, 1 March 2018, Pages 495-502 | SCI | |
| 22 | 1 | Dr.C. Elanchezhian | Multi response optimization of friction stir welding process parameters in dissimilar alloys using grey relational analysis | IOP Conference Series: Materials Science and Engineering Volume 390, Issue 1, 30 July 2018, Article number 012061 3rd International Conference on Materials and Manufacturing Engineering 2018, ICMME 2018; Kanchipuram | Scopus |
| 23 | 2 | Sensitivity analysis of process parameters on tensile properties in plasma arc welding of AA8011- H24 aluminium alloys and Ti3AL2.5v titanium alloys using response surface methodology | IOP Conference Series: Materials Science and Engineering Volume 390, Issue 1, 30 July 2018, Article number 012042 3rd International Conference on Materials and Manufacturing Engineering 2018, ICMME 2018; Kanchipuram, | Scopus | |
| 24 | 3 | Influence of friction stir processing parameters on tensile properties and microstructure of dissimilar aa 8011-h24 and aa 6061- t6 aluminum alloy joints in nugget zone | IOP Conference Series: Materials Science and Engineering Volume 390, Issue 1, 30 July 2018, Article number 012108 3rd International Conference on Materials and Manufacturing Engineering 2018, ICMME 2018; Kanchipuram | Scopus | |
| 25 | 4 | Effect of welding parameters on mechanical properties of dissimilar frictiostir processed AA 8011 and aa 5083-H321 aluminium alloys | IOP Conference Series: Materials Science and Engineering Volume 390, Issue 1, 30 July 2018, Article number 012072 | Scopus | |
| 26 | 5 | Effect of pin profile and rotational speed on microstructure and tensile strength of dissimilar AA8011, AA01- T6 friction stir welded aluminium alloys | Materials Today: Proceedings Volume 5, Issue 11, 2018, Pages 24515-24524 | Scopus | |
| 27 | 6 | Experimental investigation of composite materials for marine application - a review | IJESM, Vol 7, Issue-4, April 2018. | UGC | |
| 28 | 7 | Greedyalgorithm for inventory routing problem in a supply chain-a review | Materials Today: Proceedings. Volume 16, Pages 629-635, 2019/1/1 | Scopus | |
| 29 | 8 | Survey on inventory model of eoq & epq with partial backorder problems | Materials Today: Proceedings. Volume 16, Pages 1055-1060, 2019/1/1 | Scopus | |
| 30 | 9 | Optimization of total cost in inventory routing problem with homogenous type of vehicles using metaheuristic algorithm–a review | Materials Today: Proceedings. Volume 16, Pages 1043-1047, 2019/1/1 | Scopus | |
| 31 | 10 | An investigation of the mechanical properties of hybridcomposites in applications of automotive industry | Materials Today: Proceedings. Volume 16, Pages 875-882, 2019/1/1 | Scopus | |
| 32 | 1 | Prof. M. Suresh | Experimental investigation of performance and emission parameters of a ci engine fueled with hydnocarpus laurifolia biodiesel blends | International Journal of Mechanical Engineering and Technology Volume 9, Issue 13, December 2018, Pages 54-62 | Scopus |
| 33 | 1 | Dr. N. Mani | Influence of thrust force in drilling Al – SiC / nano TiO2 metal matrix composites using box behnken design (BBD) | Caribbean Journal of Science, Volume 53, ISSUE 1 (JAN - APR), 2019, ISSN: 0008-6452 | SCI |
| 34 | 2 | Mechanical and micro-structural characteristics of al sic metal matrix with tio2 nano composites | Journal of Advanced Microscopy Research,Vol. 13, 1–5, 2018, American Scientific Publishers | UGC | |
| 35 | 1 | Mr. G. Ramakrishnan | Sandwich and natural composites-a review - Fiber | IOP Conference Series: Materials Science and Engineering,390,1, 2018/7/1 | Scopus |
| 36 | 2 | A review on aluminium matrix composites - Metal | Advanced science engineering and medicine, Volume 10, 1-4, 2018 | Scopus | |
| 37 | 3 | Investigation of mechanical behaviour of basalt-banana hybrid composites | Silicon, Springer Netherlands,11,4, 1939-1948, 2019/8 | SCI | |
| 38 | 1 | Dr. K. Venkatraman | Implementation of mcdm model in lean manufacturing using grey relational analysis in automotive industry | International Journal of Engineering & Technology, 7 (2.33) (2018) 48-50 | Scopus |
| 39 | 2 | Model to build cost competitiveness through material productivity – a case study | IOP Conf. Series: Materials Science and Engineering 402 (2018) 012122 doi:10.1088/1757- 899X/402/1/012122 | Scopus | |
| 40 | 1 | Dr.V.M.Manickavasaga m | Investigations of tensile behaviour of basalt fiber | IOP Conference Series: Materials Science and Engineering, 2018 IOP Conf. Ser.: Mater. Sci. Eng. 377 012118 | Scopus |
| 41 | 2 | composite | The 3rd International Conference on Materials and Manufacturing Engineering 2018, I OP Conf. Series: Materials Science and Engineering 390 (2018) 012065 doi:10.1088/1757-899X/390/1/012065 | Scopus | |
| 42 | 1 | Dr. L. Saravana Kumar | Natural fibre composites-a review | Progress in industrial ecology-An international journal, Vol. 13, 2019. | Scopus |
| 43 | 1 | Dr. N. Vasudevan | Consequences of exhaust gas temperature on emissions in ci engine fuelled with calophylluminophyllum methyl esters blends with diesel | International Journal of Mechanical and Production Engineering Research and Development Volume 8, Issue Special Issue 8, August 2018, Pages 345-351 | Scopus |
| 44 | 1 | Mr. S. Ravindran | Fracture strength evaluation of composite lamination using modified wek model | International Journal of Mechanical and Production Engineering Research and Development (IJMPERD) ISSN (P): 2249-6890; ISSN (E): 2249-8001 Vol. 8, Special Issue 8, Aug 2018, 226-231 | Scopus |
| 45 | 2 | Experimental and investigation of aluminium t6 nano-reinforced hybrid metal matrix composite | Journal of Advanced Microscopy Research Vol. 13, 1–7, 2018, American Scientific Publishers | UGC | |
| 46 | 1 | Ms. A. Dhanalakshmi | An investigation on the mechanical properties of nano-al2o3 and tic reinforced aluminum | International Journal of Mechanical Engineering and Technology Volume 9, Issue 13, December 2018, Pages 192-202 | Scopus |
| 47 | 1 | Mr. R. Bhoopathi | matrix hybrid composites | IOP Conf. Series: Materials Science and Engineering 402 (2018) 012083 doi:10.1088/1757- 899X/402/1/012083 | Scopus |
| 48 | 1 | Mr. S. Krishnaraj | Experimental investigation of emission control using ag catalytic converter four stoke diesel engine | Materials Today: Proceedings, 2018, Pages 1800- 1806 | Scopus |
| 49 | 1 | Mr. V. Pandyaraj | Studies on mechanical strengths of hemp-glass fibre reinforced epoxy composites | International journal of mechanical engineering and technology, Dec 2018. | Scopus |
| 50 | 2 | Design and fabrication of casuarina harvesting machine | Materials Today: Proceedings Volume 5, Issue 2, 2018, Pages 8625-8630 | Scopus | |
| 51 | 3 | Experimental investigation of mechanical properties of gfrp with toir and flax | Lecture Notes in Mechanical Engineering Volume PartF7, 2018, Pages 333-339 | Scopus | |
| 52 | 1 | Mr. R. Senthil Kumar | Experimental investigation of compression strength in novel sandwich structure | Materials Today: Proceedings 5 (2018) 11208– 11218 | Scopus |
| 53 | 1 | Mr. T. Ganesh | Experimental investigation of spherical core sandwich structure by beam flexure | International Journal of Mechanical Engineering and Technology (IJMET) Volume 9, Issue 12, December 2018, pp. 1078–1089, Article ID: IJMET_09_12_108 | Scopus |
| 54 | 1 | Dr. C. Parswajinan | Estimation of optimal process parameters for abrasive water jet machining of marble using multi response techniques | IOP Conference Series: Materials Science and Engineering, Volume 390, The 3rd International Conference on Materials and Manufacturing Engineering 2018 8–9 March 2018, Tamilnadu, India | Scopus |
| 55 | 2 | Effect of process parameters in friction stir welding of dissimilar aluminium alloys | IOP Conference Series: Materials Science and Engineering, 2018 IOP Conf. Ser.: Mater. Sci. Eng. 390 012075 | Scopus | |
| 56 | 3 | Investigation of mechanical properties of aluminium reinforced fly ash with cnt | Materials Today: Proceedings, 2018, Pages 329-334 | Scopus | |
| 57 | 1 | Dr. S. Rajesh | Hardness and impact behaviour of aluminium metal matrix composite | International Journal of Mechanical and Production Engineering Research and Development (IJMPERD) ISSN(P): 2249-6890; ISSN(E): 2249-8001 Vol. 9, Issue 1, Feb 2019, 11-20 | Scopus |
| 58 | 1 | Mr.K. VetrivelMurugan | Design and fabrication of impact die for powder metallurgy | SAE International, June, 2018 | Scopus |
| 59 | 2 | An effect of fiber orientation of tensile and compressive properties of natural hybrid composites | SAE International, June, 2018 | Scopus | |
| 60 | 3 | Parametric study, the process benefits, optimization and chip morphology study of machining parameter on turning of inconel 718 using cvd coated tool and nd: yag laser | SAE International, July, 2018 | Scopus | |
| 61 | 4 | Empirical and artificial neural network modeling of laser assisted hybrid machining parameters of inconel 718 alloy | SAE International, June, 2018 | Scopus | |
| 62 | 5 | Design optimization of an epoxy carbon prepreg drive shaft and design of a hybrid aluminium 6061- t6 alloy/epoxy carbon prepreg drive shaft | SAE International, July, 2018 | Scopus | |
| 63 | 1 | Mr. M. Sudhakar | A study on the turning characteristics andoptimization of mos2p and sicp-reinforced al- si10mg metal matrix composites | International Journal of Mechanical Engineering and Technology (IJMET) Volume 9, Issue 13, December 2018, pp. 353–361, Article ID: IJMET_09_13_037 | Scopus |
| 64 | 1 | Mr. S.K. Dinesh Kumar | A comparative study on machinability characteristics in dry machining of inconel x-750 alloy using coated carbide inserts | International Journal of Mechanical and Production Engineering Research and Development (IJMPERD) ISSN (P): 2249-6890; ISSN (E): 2249-8001 Special Issue, May 2018, 164-171 | Scopus |
| 65 | 1 | Mr. A. Ravinthiran | Performance analysis of parabolic trough concentrating photovoltaic thermal system with trapezoidal receiver | IJMET, Vol 9, Issue 11, Nov 2018 | Scopus |
| 66 | 2 | Design of blades with dimples for vertical axis wind turbine | International Journal of Recent Technology and Engineering (IJRTE) ISSN: 2277-3878, Volume-8 Issue-1S2, May 2019 | Scopus | |
| 67 | 1 | Mr. T. Babu | Numerical investigation of mixing property of fuel and air in swirl combustor | International Journal of Engineering & Technology, 7 (2.8) (2018) 588-591 | Scopus |
| 68 | 2 | Investigation of heat dissipation between dimple and normal silencer made of chrome steel | International Journal of Recent Technology and Engineering (IJRTE) ISSN: 2277-3878, Volume-8 Issue-1S2, May 2019 | Scopus | |
| 69 | 3 | Design and fabrication of an economical coconut dehusking machine | International Journal of Recent Technology and Engineering (IJRTE) ISSN: 2277-3878, Volume-8 Issue-1S2, May 2019 | Scopus | |
| 70 | 1 | Mr. L. Ravikumar | Design and transient thermo- structural analysis of wind turbine disc brake | Journal of Bio- and Tribo-Corrosion (2018) 4:55 https://doi.org/10.1007/s40735-018-0172-x | Scopus |
| 71 | 1 | Mr. P. VijayaRajan | Analysis and shape optimization of disc brake with alternate material | International Journal of Pure and Applied Mathematics, Volume 118 No. 11 2018, 241-250 | Scopus |
| 72 | 1 | Mr. D. Prabu | Review on tribological performance of natural fibre- reinforced polymer composites | International Journal of Mechanical and Production Engineering Research and Development (IJMPERD) ISSN (P): 2249-6890; ISSN (E): 2249-8001 Vol. 8, Issue 3, Jun 2018, 489-498 | Scopus |
| 73 | 1 | Mr. S. Ramanathan | Optimization of injection moulding mould flow analysis using taguchi approach | International Journal of Mechanical Engineering and Technology (IJMET) Volume 9, Issue 2, 2018, pp. 271–279 Article ID: IJMET_09_02_026 Available online at https://www.iaeme.com/IJMET/issues.asp?JType=IJ MET&VType=9&IType=2 ISSN Print: 0976-6340 and ISSN Online: 0976-6359 | Scopus |
| 74 | 1 | Mr. V. Ranjith Kumar | A review on mechanical properties of intra-layer palm fiber (palmyra spout) – flax – s-glass fiber reinforced composite | International Journal of Mechanical and Production Engineering Research and Development (IJMPERD) ISSN (P): 2249-6890; ISSN (E): 2249-8001 Special Issue, Jun 2018, 491-498 | Scopus |
| 75 | 2 | Analysis of taper angle in nozzle in abrasive fluid jet machining using cfd | International Journal of Mechanical and Production Engineering Research and Development (IJMPERD) ISSN(P): 2249-6890; ISSN(E): 2249-8001 Special Issue, Jun 2018, 505-514 | Scopus | |
| 76 | 1 | Mr.P. Manikandan | Wear reduction analysis of aramid matrix composites | International Journal of Engineering & Technology, 7 (3.34) (2018) 357-361 | Scopus |
| 77 | 1 | Mr. M. Raajasekar | Cryogenic characterisation of chemically treated vetiver fibre – epoxy polymer composite | International Journal of Mechanical and Production Engineering Research and Development (IJMPERD) ISSN(P): 2249-6890; ISSN(E): 2249-8001 Special Issue, Jun 2018, 499-504 | Scopus |
| 78 | 1 | Mr. E. Naveen | Rejection rate analysis on rail wheels | International Journal of Mechanical Engineering and Technology Volume 9, Issue 13, December 2018, Pages 1378-1389 | Scopus |
| 79 | 1 | Mr.S. Siva Chandran | Mechanical properties, tribological characteristics of stir cast aluminium metal matrix composites (ammcs) - a review | International Journal of Mechanical Engineering and Technology Volume 9, Issue 12, 2018, Pages 922- 927 | Scopus |
| 80 | 2 | Experimental study of plane displacement and strain measurement using digital image correlation in matlab and validation by ansys | International Journal of Mechanical Engineering and Technology Volume 9, Issue 11, November 2018, Pages 2263-2271 | Scopus | |
| 81 | 3 | Comparison of different tool path in pocket milling | Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, 2018 Taylor & Francis Group, LLC, 30 Dec 2018 | SCI | |
| 82 | 4 | Performance analysis milling operation In End | International Journal of Mechanical Engineering and Technology (IJMET) Volume 10, Issue 01, January 2019, pp. 984-992, | Scopus | |
| 83 | 1 | Mr. K. Trinath | Environmental effect of ci engine using microalgae biofuel with nano-additives | ICAME, (2018) Material Science and engineering, IOP Conference | Scopus |
| 84 | 1 | Mr. J Jeykrishnan | Optimization of co2 laser cutting parameters on austenite stainless steel using grey relational analysis | Materials Today: Proceedings 5 (2018) 20449– 20454 | Scopus |
| 85 | 2 | Development and characteristic of biodegradable blending starch/pva films theoretical and experimental comparision | 2nd International conference on Advances in Mechanical Engineering (ICAME 2018) IOP Conf. Series: Materials Science and Engineering 402 (2018) 012084 | Scopus | |
| 86 | 3 | Investigation on the influence of performance characteristics on machining inconel 625 alloy in electro-discharge machining (edm) | International Journal of Mechanical Engineering and Technology Volume 9, Issue 8, August 2018, Pages 386-390 | Scopus |