Infrastructure

MANUFACTURING TECHNOLOGY LABORATORY I

Name of the Machine

  • Padmini Lathes
  • All Gear Head / Pl -4
  • Norton Gear /Pl- 4
  • Cone Pulley / Pl – 4
  • Norton Gear /Omega
  • Norton Gear /Pl – 4 Pilot
  • All Gear Head / Banka

  • All Gear Head / Panther Brand
  • Light Duty Lathe Machine
  • Radial Drilling Machine
  • Drilling Machine Pillar Type
  • Hydraulic Hacksaw Machine
  • Mechanical Hacksaw Machine
MANUFACTURING TECHNOLOGY LABORATORY II

Name of the Machine

  • Universal Milling Machine
  • Tool and Cutter Grinding Machine
  • Hydraulic Surface Grinding Machine
  • Surface Grinding Machine
  • Cylindrical Grinding Machine
  • Slotting Machine

  • Shaping Machine
  • Vertical Turret Milling Machine
  • Hydraulic Hacksaw Machine
  • Capstan Lathe
  • Planning Machine
  • Gear Hobbing Machine
  • Turret Lathe
  • Angle Grinding Machine
STRENGTH OF MATERIALS LABORATORY

Name of the Machine

  • Universal Testing machine (Analog) – 40 Ton
  • Analog cum Computerized Universal Testing machine- 40 Ton
  • Torsion Testing Machine – 200 Nm
  • Digital Torsion Testing Machine
  • Impact Testing Machine – 300 J Capacity
  • Brinell Hardness Testing Machine
  • Rockwell Hardness Testing Machine
  • Tensile Testing Machine -2500 N
  • (Spring Testing Machine)
  • Digital Spring Testing Machine

  • Deflection Test Apparatus – Simply Supported Beam
  • Deflection Test Apparatus – Cantilever Beam
  • Strain measurement using Strain gauge
  • Erichsen Cupping Testing Machine
  • Fatigue Testing Machine
  • Linisher polisher
  • Disc Polishing machine
  • End Quench Apparatus
  • Metallurgical Microscopes
  • Muffle Furnace (800 C)
FLUID MECHANICS AND MACHINERY LABORATORY

Name of the Machine

  • Orifice Meter
  • Venturi Meter
  • Pipe Friction set-up
  • Reciprocating Pump
  • Gear Oil Pump
  • Bernoulli`S Theorem Verification Apparatus
  • Kaplan Turbine
  • Self- Priming Pump
  • Francis Turbine

  • Pelton Turbine
  • Centrifugal Pump (Variable Speed)
  • Submersible Pump
  • Jet Pump
  • Rotameter
  • Notches
  • Metacentric Appratus
  • Pitot Tube
  • Pitot Tube Apparatus For Air
THERMAL ENGINEERING LABORATORY

Name of the Machine

  • Variable Compression Ratio Engine Test Rig.
  • Single Cylinder Four Stroke Diesel Engine Test Rig. With Mechanical Loading
  • Single Cylinder Four Stroke Diesel Engine Test Rig. With Electrical Loading
  • Single Cylinder Four Stroke Diesel Engine Test Rig. With Hydraulic Loading.
  • Twin Cylinder Four Stroke Diesel Engine Test Rig. With Electrical Loading
  • Multi Cylinder Four Stroke Petrol Engine Test Rig. With Mechanical Loading
  • Single Cylinder Four Stroke Petrol Engine Test Rig. With Mechanical Loading
  • Single Cylinder Four Stroke Diesel Engine Test Rig. With Mechanical Loading
  • Single Cylinder Four Stroke Diesel Engine Test Rig. With Mechanical Loading
  • Twin Cylinder Diesel Engine Four Stroke Test Rig. With Mechanical Loading

  • Multi Cylinder Petrol Engine Test Rig. With Hydraulic Loading
  • Single Cylinder Four Stroke Petrol Engine Test Rig. With Electrical Loading
  • Single Cylinder Four Stroke Diesel Engine Test Rig. With Eddy Current Dynamometer
  • Single Cylinder Four Stroke Diesel Engine Test Rig. With Mechanical Loading
  • Single Cylinder Four Stroke Diesel Engine Cut Section Model.
  • Single Cylinder Two Stroke Petrol Engine Cut Section Model.
  • Single Cylinder Four Stroke Diesel Engine Cut Section Model.
  • Single Cylinder Two Stroke Petrol Engine Cut Section Model.
  • Multi Cylinder Two Stroke Petrol Engine Cut Section Model.
  • Single Acting Two Stage Air Compressor.
  • Single Acting Two Stage Air Compressor.
  • Steam Boiler With Turbine Setup.
  • Low Speed Wind Tunnel.
BASIC WORKSHOP I – PLUMBING AND CARPENTRY

Name of the Machine

  • Assorted components for plumbing consisting of metallic pipes, plastic pipes, flexible pipes, couplings, unions, elbows, plugs and other fittings.
  • Carpentry vice (fitted to work bench)
  • Standard woodworking tools
  • Models of industrial trusses, door joints, furniture joints
  • Power Tools: (a) Rotary Hammer
    (b) Demolition Hammer
    (c) Circular Saw
    (d) Planer
    (e) Hand Drilling Machine
BASIC WORKSHOP II – WELDING AND FOUNDRY

Name of the Machine

  • Arc welding transformer with cables and holders
  • Welding booth with exhaust facility
  • Welding accessories like welding shield, chipping hammer, wire brush, etc.
  • Oxygen and acetylene gas cylinders, blow pipe and other welding outfit.
  • Centre lathe
  • Hearth furnace, anvil and smithy tools
  • Moulding table, foundry tools
  • Power Tool: Angle Grinder
  • Study-purpose items: centrifugal pump, air-conditioner

  • Hearth furnace, anvil and smithy tools
  • Moulding table, foundry tools
  • Power Tool: Angle Grinder
  • Study-purpose items: centrifugal pump, air-conditioner
MECHATRONICS LABORATORY

Name of the Machine

  • Basic Pneumatics Trainer kit.
  • Electro Pneumatics Trainer kit.
  • Electro Basic Pneumatics Trainer kit with PLC.
  • Automation Studio
  • Lab view software with computer based data logging system
  • Stepper motor mill step interfacing with 8051 micro controller
  • Servo Controller Interfacing for Open loop
  • Servo Controller Interfacing for Closed loop

  • PID Controller Trainer Kit
  • Servo controller Interfacing for DC motor & PID Controller Interfacing
  • Speed control of AC & DC Drives
  • Design and testing of fluid power circuits to control
  • (i) Velocity (ii)Direction (iii) Force of double acting actuator
  • Computer data logging system with control for process Variable like pressure flow and temperature.
  • Traffic light control system & Transducer trainer.
  • Air Compressor
METROLOGY LABORATORY

Name of the Machine

  • Profile Projector
  • Tool Makers Microscope
  • Optical Auto Collimator
  • Pneumatic Comparator
  • Floating Carriage Micrometer
  • Electrical Comparator (Lvdt)
  • Vibration Measurement Setup
  • Torque Measurement Setupv
  • Force Measurement Setup
  • Temperature Measurement Setup
  • Dial Gauge (0.01 – 10mm)
  • Dial Gauge(0.001mm)
  • Dial Gauge (Dial Type)
  • Slip Gauge Set
  • Gear Tooth Vernier
  • Vernier Bevel Protractor
  • Sine Bar (125mm)
  • Sine Bar (250 Mm)
  • Verniercaliper 8”
DYNAMICS LABORATORY

Name of the Machine

  • Turn Table Apparatus
  • Vibrating Table
  • Balancing of Rotating Masses
  • Profile Analyzer Setup
  • Spring Mass system
  • Transverse Vibration of Free beam
  • Turn Table Apparatus
  • Dynamic Balancing Machine
  • Vibration Apparatus
  • Universal Governor
  • Motorized Gyroscope
  • Whirling of Shaft
  • Balancing of Reciprocating Masses
  • Fly Wheel and Connecting Rod
  • Universal Joint
  • Compound Gear
  • Differential Gear
  • Kinematic of Gears
  • Worm Gear
  • Epicyclical Gear
  • Clutch Assembly
  • Multi Degree of Freedom (Bi-filar& Try filar Suspension System )
  • Balancing of Rotating Masses
  • Dial Gauge
HEAT TRANSFER LABORATORY

Name of the Machine

  • Guarded plate apparatus
  • Lagged pipe apparatus
  • Forced convection inside tube apparatus
  • Composite wall apparatus
  • Thermal conductivity of insulating powder apparatus
  • Pin-fin apparatus
  • Stefan-Boltzmann apparatus

  • Emissivity measurement apparatus
  • Parallel/counter flow heat exchanger apparatus
  • Single/two stage reciprocating air compressor
  • Refrigeration test rig
  • Air-conditioning test rig
STEAM LABORATORY

Turbine Specification

TypeImpulse turbine
No. of Nozzles3
Inlet Pressure10 bar
Steam flow rate0.01 Kg/sec
Speed Range2500 to 3000 rpm

Boiler Specification

TypeNON IBR, Automatic, 3 Phase
Model / FuelSBS 200 / Diesel
Capacity200 Kg/hr.
Operating Pressure12 Bar
Inlet Temperature Range1200 C to 1600 C
COMPUTER AIDED DRAFTING LAB

Name of the Equipment

  • Intel Pentium 3 @ 2.6 MHz, CPU Intel original 9.15 GAV motherboard with built-in audio & video, 256 MB DDR, 1.44 MB FDD, 52 x CD writer, 80 GB HDD, 15” Samsung digital color monitor, TVSE PS2 gold keyboard & optical mouse, 10/100 Mbps Ethernet card, cabinet with power supply unit.
  • Dell Optiplex 3040 Desktop
    6th Gen Intel Core i5 Processor, 4GB Ram, 1 TB Hard disk, Dos, DVD Drive, 18.5” LED Monitor, Keyboard with Mouse, 3 Years Warranty
  • 10.0 KVA UPS System
    Liebert make S400D 10.0KVA 3Ph I/P 230V O/p, DSP Powered, next generation technology based online UPS System with 12V, 26AH, 26 Nos. Sealed Maintained free batteries to support 30 minutes battery backup with suitable racks, inter – cell connectors and cable
  • LIEBERT PB 6.0 KVA UPS System
    Serial No: 160906AS7224
    12V, 26AH, 16 Nos. Quanta Sealed Maintained free batteries
  • Panasonic 3 TR Casette Tower Model AC

    • Panasonic 4 TR Casette Tower Model AC

  • 8907-Fujitsu Lifebook LH531 Laptop Core i5-2nd Gen/ 4GB Ram/ 750Gb HDD/ 15” Display/ DOS/ Backbag.
  • Hp-33330 Core I 3-2100,2GB DDR3RAM, 500 GB HDD,
  • Computer Chairs Fibre Moulded without arms
  • HP Laser Jet – 1008
  • TVS MSP 255 Dot matrix printer
  • Scanner: HP G2410
  • Vaccum Cleaner 1600W Max

    • SOFTWARES

    • Solidworks
    • NX CAD/CAM – Uni Graphics
    • Ansys 9.0 /Ansys 10.0 (Updation)
    • EdgeCAM
    • Pro –E 05
    • Auto CAD 2011
    • CATIA V6
    • Pro – E

    [/wc_row]

SIMULATION & ANALYSIS LABORATORY

Name of the Equipment

  • SERVER
    IBM Server
    Intel Xeon 5506 (Quad Core – NEHELAM)/ 2.13 Ghz/8MB L3 CACHE/1066 Mhz/2GB RAM/250 GB SATA @3.5” HDD/RAID 0&1 CARD/ DVD-ROM/KEY BOAED/MOUSE/ LENOVA 18.5” TFT MONITOR
  • Dell Optiplex 3040 Desktop
    6th Gen Intel Core i5 Processor, 4GB Ram, 1 TB Hard disk, Dos, DVD Drive, 18.5” LED Monitor, Keyboard with Mouse, 3 Years Warranty
  • 10.0 KVA UPS System
    Liebert make S400D 10.0KVA 3Ph I/P 230V O/p, DSP Powered, next generation technology based online UPS System with 12V, 26AH, 26 Nos. Sealed Maintained free batteries to support 30 minutes battery backup with suitable racks, inter – cell connectors and cable
  • Panasonic Make 3 TR Copper Model Cassette Type Unit
    Plotter: HP Design Jet 500 Mono Roll 24” Printer
    Computer Chairs Fibre Moulded without arms
COMPUTER AIDED MODELLING LABORATORY

Name of the EquipmentQuantity
SERVER1
IBM Server Intel Xeon 5506 (Quad Core – NEHELAM)/ 2.13 Ghz/8MB L3 CACHE/1066 Mhz/2GB RAM/250 GB SATA @3.5” HDD/RAID 0&1 CARD/ DVD-ROM/KEY BOAED/MOUSE/ LENOVA 18.5” TFT MONITOR
Dell Optiplex 3040 Desktop 6th Gen Intel Core i5 Processor, 4GB Ram, 1 TB Hard disk, Dos, DVD Drive, 18.5” LED Monitor, Keyboard with Mouse, 3 Years Warranty30
Desktop-Dell Optiplex 980DT Base N-Series, 2GB Ram, 320GB Sata 3.0 Gb/s Hard Drive, 16x DVD +/- RW Drive, DellTM E 1910 H 18.5” Wide Screen Flat Panel Monitor (VGA), Dell MS III USB Optical Mouse, DellTMQuietkey Keyboard.4
Intel® Core 2 Duo CPU E7500@2.93GHz 2 GB of RAM 250 GB HDD 19 LG LCD Monitor, Samsung DVD writer, Logitech keyboard, Logitech mouse, ATX Cabinet (Black).10
10.0 KVA UPS System Liebert make S400D 10.0KVA 3Ph I/P 230V O/p, DSP Powered, next generation technology based online UPS System with 12V, 26AH, 26 Nos. Sealed Maintained free batteries to support 30 minutes battery backup with suitable racks, inter – cell connectors and cable 4
Panasonic Make 3 TR Copper Model Cassette Type Unit4
Transcend 2*2 GB DDR215
Asus 1GB DDr3 Graphic Card15
Computer Chairs Fibre Moulded without arms50
HP DeskJet 640C1
HP Deskjet 3420 Colour1
HP DeskJet 3325 Colour1

COMPUTER AIDED MANUFACTURING LAB

VERTICAL MACHINING CENTRE – LV45

MAXIMUM TABLE TRAVELX-AXIS : 450 mm

Y-AXIS : 350 mm

Z-AXIS : 350 mm
TABLE SIZE600 x 350 mm
SPINDLE RANGE8000 RPM
TOOL CAPACITY16 Tools
CNC SYSTEMFANUC
POWER15 kVA

TURNING CENTRE – LLV 15 TL3


SWING OVER BED480 mm
SWING OVER CARRIAGE260 mm
ADMIT BETWEEN CENTRES345 mm
MAXIMUM TURNING LENGTH262 mm
MAXIMUM TURNING DIAMETER200 mm
TURRET SIZE8 TOOLS
TOOL INDEXINGBI-DIRECTIONAL
POWER15 kVA