| Sl.NO | First author | Title of Paper | Source |
|---|---|---|---|
| 1 | Dr. A. Rajendra Prasad | Prevention of Air Suffocation Inside a Car Cabin Using a Mechatronic System | International Journal of Mechanical Engineering and Technology (IJMET) Volume 8, Issue 8, August 2017, pp. 738747 |
| 2 | An Approach To the Development of a Green energy farm using Free flow Horizontal Axis Water turbine | International journal of of Mechanical engineering and technology 2017, Vol 8, PP 25-36 | |
| 3 | Dr. B. Vijaya Ramnath | A review on friction stir welding of aluminium metal matrix composites | IOP Conference Series: Materials Science and Engineering 390 (1), 012103, selected from ICMME 2018, Organised by SCSVMV University, March 8 & 9, 2018 https://doi.org/10.1016/j.matdes.2015.07.071 |
| 4 | Review on natural fiber composites | IOP Conference Series: Materials Science and Engineering 390 (1), 012065,selected from ICMME 2018, Organised by SCSVMV University, March 8 & 9, 2018 | |
| 5 | Mechanical and wear behavior of aluminium-zircon sand-fly ash metal matrix composite | IOP Conference Series: Materials Science and Engineering 390 (1), 012018, selected from ICMME 2018, Organised by SCSVMV University, March 8 & 9, 2018 | |
| 6 | A review on sandwich and natural fiber composites | IOP Conference Series: Materials Science and Engineering 390 (1), 012069, selected from ICMME 2018, Organised by SCSVMV University, March 8 & 9, 2018 | |
| 7 | Studies On Mechanical Behaviour Of Basalt Fiber Composite | IOP Conf. Series: Materials Science and Engineering 377 (2018) 012119, International Conference on Mechanical, Materials and Renewable Energy | |
| 8 | Investigation on Mechanical and Thermal Properties of Stainless Steel Wire Mesh-Glass Fibre Reinforced Polymer Composite | Silicon (2018). pp. 1-9 https://doi.org/10.1007/s12633-018-9801-8 | |
| 9 | A review on natural composites | Advanced Science, Engineering and Medicine Volume 10 , 2018, Pages 1-3, ICMME 2017-SCSVM Uty. https://doi.org/10.1166/asem.2018.2162 |
|
| 10 | Design and Development of Milling Fixture for Friction Stir Welding | Elsevier - Materials Today Proceedings selected from PMME-2016, Paper ID: EMT-440. | |
| 11 | Experimental investigation of flexural and hardness behavior of hemp flax hybrid composite | International Journal of Mechanical and Production Engineering Research and Development 8(4),IJMPERDAUG20187, pp. 55-60 | |
| 12 | Experimental investigation of tensile and impact behaviour of hemp flax hybrid composite | International Journal of Mechanical and Production Engineering Research and Development8(3), IJMPERDJUN201859, pp. 549-556 | |
| 13 | Studies on Mechanical Behaviour of Aluminium-Silicon Carbide-Copper Metal Matrix Composite | MATEC Web of Conferences 166,01001 | |
| 14 | Investigation of Mechanical Properties of Aluminium 6061-Silicon Carbide, Boron Carbide Metal Matrix Composite | Silicon 10(2), pp. 495-502 | |
| 15 | Sea Shells and Natural Fibres Composites: A Review | Elsevier Materials Today Proceedings selected from PMME-2016, Paper ID: EMT-439. | |
| 16 | Implementation of Reverse Engineering for Crankshaft Manufacturing Industry | Elsevier Materials Today Proceedings selected from PMME-2016,Paper ID: EMT-385. | |
| 17 | Implementation of Concurrent Redesign & Manufacture procedure for an automotive component | Materials Today: Proceedings 5 (2018) 14181424 | |
| 18 | Investigation of Shear behaviour of polymer composite golf shaft | Materials Today: Proceedings 4 (8), 9218-9223 Materials Today Proceedings selected from ICAAMM16 organised by MLR, Hydrabed | |
| 19 | Investigation of torsional behavior of polymer composite golf shaft | Volume 4, Issue 2, Part A, 2017, Pages 3342-3345, Elsevier - Materials Today selected from ICMPC16 | |
| 20 | Investigation on effect of fibre hybridization and orientation on mechanical behaviour of natural fibre epoxy composite | Bulletin of material science, VOL.44, 773-782, 2017.(Impact factor: 0.889) | |
| 21 | Prediction of tensile behavior of polymer composite golf shaft | Volume 4, Issue 2, Part A, 2017, Pages 3356-3360, Elsevier Materials Today selected from ICMPC16 | |
| 22 | Optimization of process parameters in drilling of fibre hybrid composite using Taguchi and grey relational analysis | IOP Conference Series: Materials Science and Engineering 183 (1) (2017), 012003 | |
| 23 | Dr.C. Elanchezhian | Review on mechanical properties of natural fiber composites | Materials Today: Proceedings 5 (2018) 1785 -1790 |
| 24 | Review on metal matrix composites for marine applications | Materials Today: Proceedings 5 (2018) 12111218 | |
| 25 | Design and comparison of strength and efficiency of drive shaft made of steel and composite materials | Materials Today: Proceedings 5 (2018) 1000-1007 | |
| 26 | Modeling and Optimization of FSW Parameters on Tensile Behavior of Aluminium Alloys using D-Optimal Design | Adv. Sci. Eng. Med. 10, 384 389 (2018) | |
| 27 | Mr.G. Ramakrishnan | A Review on Aluminium Metal Matrix Composites | Adv. Sci. Eng. Med. 10, 263 267 (2018) |
| 28 | Sandwich and Natural fiber composites - A review | IOP Conference Series: Materials Science and Engineering 390 (1), 012067, selected from ICMME 2018, Organised by SCSVMV University, March 8 & 9, 2018 | |
| 29 | Dr.L. Saravana Kumar | Effects of combustion chamber geometry on combustion characteristics of a DI diesel engine fueled with calophyllum inophyllum methyl ester | Journal of the Energy Institute 90 (2017) 82-100 |
| 30 | Dr.V.M.Manickavasagam | Natural fiber composites-A review | IOP Conference Series: Materials Science and Engineering 390 (1), 012065, selected from ICMME 2018, Organised by SCSVMV University, March 8 & 9, 2018 |
| 31 | Investigation of Tensile behavior of Basalt Fiber Composite | IOP Conf. Series: Materials Science and Engineering 377 (2018) 012118; International Conference on Mechanical, Materials and Renewable Energy-IOP Publishing | |
| 32 | Dr. K.Venkataraman | Survey of duplicate detection using progressive detection techniques | International Journal of Engeneering and Technology,7(1.9)(2018)171-172 |
| 33 | LA VIE ENREGISTRER | 2017 Second International Conference On Computing and Communications Technologies(ICCCT17) | |
| 34 | Mr.Krishnaraj S | Design and Fabrication of Casuarina Harvesting Machine | Materials Today: Proceedings 5 (2018) 1800 - 1806 |
| 35 | Mr.R Senthil kumar | Abrasive water jet machining of various materials A review | 1. Advances in natural and applied sciences 2017 special 11(6) pp445-453 |
| 36 | Mr. S. Rajesh | Review on Testing of Polymer Fasteners | Materials Today: Proceedings 5 (2018) 1817 1823 |
| 37 | Investigation of Tensile Behavior of Kevlar Composite | Materials Today: Proceedings 5 (2018) 1156 1161 | |
| 38 | Mr.C. Parswajinan | Mechanical investigation of Aluminum hybrid Composite Reinforced with CNT and Aluminum oxide (Al2O3) | International Journal Applied Mechanics and Materials selected from ICMME 2017-SCSVM Uty |
| 39 | Investigations of mechanical properties of Aluminium Matrix Composite reinforced with B4C and MWCNT | International Journal Applied Mechanics and Materials selected from ICMME 2017-SCSVM Uty | |
| 40 | Mechanical Behavior of Aluminium Metal Matrix Composite | Advanced Science, Engineering and Medicine Vol. 10, 13, 2018 | |
| 41 | Determination of Mechanical Behaviour of Fe-CNT MMC | Elsevier Materials Today Proceedings selected from PMME-2016,Paper ID: EMT-383 | |
| 42 | Design and fabrication of Impact Die for Powder Metallurgy | Elsevier Materials Today Proceedings selected from PMME-2016,Paper ID: EMT-388 | |
| 43 | Hardness and impact behaviour of aluminium metal matrix composites | IOP Conference Series: Materials Science and Engineering 390 (1), 012075, selected from ICMME 2018, Organised by SCSVMV University, March 8 & 9, 2018 | |
| 44 | Investigation of Mechanical properties of Aluminium reinforced Fly ash with CNT | IOP Conference Series: Materials Science and Engineering 390 (1), 012032, selected from ICMME 2018, Organised by SCSVMV University, March 8 & 9, 2018 | |
| 45 | Mr.L Ravikumar | Flexural test on hybrid Bio composite Materials | Indian journal of science and technology, 2017 vol 10(7) pp 1-5 |
| 46 | Optimization of Operational Cycle Time for Testing Of Filter Pop-Out Indicator for Helicopter Gearbox Application | Journal of Chemical and Pharmaceutical Sciences JCPS Volume 10 Issue 4 ISSN (Print 0974-2115) (Online 2349-8552) | |
| 47 | Mr.Jeykrishnan J | Optimization of process parameters in Electro-chemical Machining (ECM) of D3 die steels using Taguchi technique | Materials today: Proceedings, Vol. 4 (8), 2017, pp. 7884-7891 |
| 48 | Parametric Analysis on Electro chemical Machining of SKD12 Tool steel | Materials today: Proceedings, Vol. 4, 2017, pp. 3760-3766 | |
| 49 | Mr.Ramanathan S | Analysis of Taper Angle In Nozzle In Abrasive Fluid Jet Machining Using CFD | International Journal of Mechanical Engineering and Technology (IJMET) Volume 9, Issue 2, February 2018, pp. 271279 |
| 50 | Mr.E Naveen | Influence of organic corrosion inhibitors on pickling corrosion behaviour of sinter forged C45 steel and 2% Cu alloyed C45 steel | Journal of alloys and compounds 2017 vol 695 pp 3299-3309 |
| S:NO | SL.No. | First author | Title of Paper | Source |
|---|---|---|---|---|
| 1 | 1 | Dr. B. Vijaya Ramnath | Parametric analysis on Electro-chemical machining of SKD-12 tool steel | Volume 4, Issue 2, Part A, 2017, Pages 3760 - 3766, Elsevier - Materials Today selected from ICMPC16 |
| 2 | 2 | Investigation of flexural behaviour of polymer composite golf shaft | Materials Today: Proceedings 4 (8), 9341-9345, 2017 Materials Today Proceedings selected from ICAAMM16 organised by MLR, Hydrabed | |
| 3 | 3 | Experimental investigation of flexural and hardness behaviour of hemp flax hybrid composite | International Journal of Mechanical and Production Engineering Research and Development 8(4),IJMPERDAUG20187, pp. 55-60 |
|
| 4 | 4 | Studies on Mechanical Behaviour of Basalt Fiber Composite | IOP Conference Series: Materials Science and Engineering 377(1),012119 | |
| 5 | 5 | Experimental investigation of tensile and impact behavior of hemp flax hybrid composite | International Journal of Mechanical and Production Engineering Research and Development 8(3),IJMPERDJUN201859, pp. 549-556 |
|
| 6 | 6 | Studies on Mechanical Behaviour of Aluminium-Silicon Carbide-Copper Metal Matrix Composite | MATEC Web of Conferences 166,01001 | |
| 7 | 7 | Investigation of Mechanical Properties of Aluminium 6061- Silicon Carbide, Boron Carbide Metal Matrix Composite | Silicon 10(2), pp. 495-502 | |
| 8 | 8 | Investigation Of Mechanical Behaviour Of Sisal Epoxy Hybrid Composites | Indian Journal of Science and Technology, Volume 9, Issue 34, September 2016 | |
| 9 | 1 | Mr.R. Ashok Gandhi | Development and Field Trials of Ultra Low Wind Speed Vertical Axis Wind Turbine (VWAT) for Home Application | Indian Journal of Science and Technology, Vol 9(S1) |
| 10 | 1 | Mr.M. Arul Prakash | Effect of Inlet Slot Dimension on Laminar Plane Wall Jet Flow over an Obstacle | Advances in natural and applied sciences, 2017 April 11(4): pages 580-587 |
| 11 | 2 | Numerical investigations on effect of obstacle in an incompressible laminar wall jet flow | Applied Mechanics and Materials 2016 vol 852, pp 747-753 | |
| 12 | 1 | Mr.R. Bhoopathi | Physical Properties of Glass-Hemp banana hyprid fiber reinforced polymer composites | Indian journal of science and technology. 2016 Vol 10(7) pp1-6 |
| 13 | 1 | Mr.V Pandyaraj | Investigation of pump impeller performance using CFD | Indian journal of science and technology 2016 vol 9 pp 1-6 |
| 14 | 1 | Mr.R Senthil kumar | Optimisation of process parameters for machining marble using Abrasive water jet machining through multi response techniques | Indian journal of science and technology, 2016 Vol9 S1 pp 1-6 |
| 15 | 1 | Mr.S. Rajesh | Investigation of Flexural Response of Kevlar Composite | Indian Journal of Science and Technology, Vol 9 S(1),December 2016 |
| 16 | 1 | Mr.Vetri Velmurugan K | Experimental investigation and optimization of machining parameters using grey relational analysis approach and fuzzy based taguchi loss function method | Indian journal of science and technology 2016 Vol 9(44) pp 1-7 |
| 17 | 2 | An investigation of the parametric effects of cutting parameters on quality characteristics during the dry turning of Inconel 718 alloy | Indian journal of science and technology 2016 Vol 9(44) pp 1-7 | |
| 18 | 1 | Mr.Swaminathan G | Experimental analysis of hardness and densification of microwave sintered AL/SIC/AL2o3/flyash composites | Indian journal of science and technology 2016 Vol 9(42) pp1-6 |
| 19 | 1 | Mr.SK Dinesh kumar | A study on working process of wire EDM by using two different dielectric fluids on HCHCR alloy steel | Applied mechanics and materials, 2016 vol 852 |
| 20 | 1 | Mr.Ravinthiran A | A comparative study and flow analysis of multiple branch pipe flow header used in tube heat exchangers | Indian journal of science and technology 2016 Vol 9(48) pp 1-5 |
| 21 | 1 | Mr.Trinath K | Mechanical characteristics of micro and nano silica, ZnO and chitin powder filled unsaturated polyester composites | Indian journal of science and technology 2016 Vol 9(S1) |
| 22 | 1 | Mr.T.Babu | Design and analysis of composite leaf spring under fatigue load condition | International journal of Engineering technology and management,2017, Vol 01 |
| 23 | 1 | Mr. L . Ravikumar | Characterisation of mechanical seal using hybrid of natural materials | Indian journal of scienceand technology, 2016 Vol 9(48) pp 1-5 |
| 24 | 1 | Mr.Jeykrishnan J | Fabrication and characterization of Aluminum Titanium di-Boride metal matrix composites using stir casting technique | International Journal of Mechanical Engineering and Technology, Vol. 8 (4), 2017, pp. 13-18 |
| 25 | 2 | Effects of Die sinking in Electro Discharge Machining Parameters in surface roughness using Inconel 825 alloy | Indian Journal of science and technology, Vol 9 (41), 2016 | |
| 26 | 3 | Investigation on tensile and impact behaviour of Aluminium based silicon carbide metal matrix composites | Indian journal of science and technology, Vol 9 (37), 2016 | |
| 27 | 4 | Parametric optimization of powder mixed electro-discharge machining using Taguchi technique | International journal of latest trends in engineering and technology, Vol. 7 (3), pp. 61-66, 2016 | |
| 28 | 1 | Dr.M. Ramesh | Experimental Investigation on the Mechanical Properties of Green Hybrid Sisal and Glass Fiber Reinforced Polymer Composites | Journal of Natural Fibers |
| S:NO | SL.No. | First author | Title of Paper | Source |
|---|---|---|---|---|
| 1 | 1 | Dr. A. Rajendra Prasad | Evaluation of Mechanical Properties and Analysis of Rapidly Heat Treated T-1 High Speed Steels | International Journal of applied Engineering research, 2015, ISSN 0973-4562 Vol 10, PP 477-483 |
| 2 | 1 | Dr. B. Vijaya Ramnath | Investigation on Mechanical Behaviour of Twisted Natural Fiber Hybrid Composite Fabricated by Vacuum Assisted Compression Molding Technique | Fibers and Polymers , Vol.17, No.1, 2016, 80-87. |
| 3 | 2 | A Grey-Fuzzy Modeling For Evaluating Surface Roughness And Material Removal Rate Of Coated End Milling Insert | VOL. 84, NO. 13, 2016, 68-82, Measurement | |
| 4 | 3 | Investigation of Mechanical Properties of Aluminium6061-Silicon Carbide, Boron Carbide Metal Matrix Composite | DOI: 10.1007/s12633-016-9479-8 2016, Silicon, | |
| 5 | 4 | Thermal Behavior of Flax Kenaf Hybrid Natural Fiber Composite | International Journal of Advanced Research in Science, Engineering and Technology. | |
| 6 | 5 | Investigation Of Flexural And Water Absorption Behaviour Of Epoxy Hybrid Composites | Advances in Natural and Applied Sciences. 10(7) , 2016, Pages: 34-39 | |
| 7 | 6 | Optimization of machining parameter of aluminium alloy using taguchi based regression modelling | Indian Journal of Science and Technology selected from ICMMMS16 | |
| 8 | 7 | An investigation of tensile & impact properties of alkali treated and untreated epoxy-sisal reinforced composites | Indian Journal of Science and Technology, selected from ICMMMS16 | |
| 9 | 8 | Wastage reduction through Lean Manufacturing in head lamp casing manufacturing process | International Journal Applied Mechanics and Materials, Volume 766-767, 2015, Pages 1196-1200. | |
| 10 | 9 | Investigation of Tensile Property of Aluminium SiC Metal Matrix | International Journal Applied Mechanics and Materials, Volume 766-767, 2015, Pages 252-256. | |
| 11 | 10 | Experimental Investigation on Shear and Hardness of Abaca based Hybrid Composites | ICMER 2015, MATEC Web of Conferences 74, 00039 (2016) | |
| 12 | 11 | Kenaf fibre reinforced composites: A review | ARPN Journal of Engineering and Applied Sciences, VOL. 10, NO. 13, 2015,5483-5485 . | |
| 13 | 12 | Investigation of Tensile Properties of Manila Fibre Reinforced Composite | International Journal Applied Mechanics and Materials, Volume 766-767, 2015, Pages 96-99. | |
| 14 | 13 | Investigation of Flexural Characteristics of Flax and Abaca Hybrid Epoxy Composites | International Journal Applied Mechanics and Materials, Volume 766-767, 2015, Pages 183-186. | |
| 15 | 14 | Investigation of tensile and impact behaviour of abaca-raffia hybrid composite | ARPN Journal of Engineering and Applied Sciences, VOL. 10, NO. 13, 2015,5577-5580. | |
| 16 | 15 | Experimental investigation on flexural property of abaca and raffia hybrid composites | ARPN Journal of Engineering and Applied Sciences, VOL. 10, NO. 13, 2015, 5534- 5536. | |
| 17 | 16 | Investigation of flexural property of kenaf- flax hybrid composite | ARPN Journal of Engineering and Applied Sciences, VOL. 10, NO. 13, 2015, 5560-5563. | |
| 18 | 17 | Experimental investigation on delamination behaviour of abaca based hybrid composites | ARPN Journal of Engineering and Applied Sciences, VOL. 10, NO. 13, 2015, 5548-5550. | |
| 19 | 18 | Experimental Determination of Mechanical Properties of Banana Jute Hybrid Composite | Fibers and polymers, Volume 16, Pages 164-172, 2015. | |
| 20 | 19 | Investigation of tensile property of nylon glass fiber polymer matrix composite | ARPN Journal of Engineering and Applied Sciences, VOL. 10, NO. 13, JULY 2015, 5469-5471. | |
| 21 | 20 | Effect of Fiber Orientation and Stacking Sequence on Mechanical and Thermal Characteristics of Banana-Kenaf Hybrid Epoxy Composite | Silicon, 2015, 1-9 . | |
| 22 | 1 | Dr.C. Elanchezhian | Investigating the weld strength of AA 7075 Aluminium alloy for TIG, MIG and FSW Welding | Applied mechanics and materials,2015 Vols 766-767 pp727-732 |
| 23 | 2 | Comparitive study of friction stir welding with Plasma arc welding | Applied mechanics and materials, 2015, Vol 766-767 | |
| 24 | 3 | Evaluation of mechanical properties of human hair- Bonbyx mori silk fibre reinforced epoxy based Bio composite | ARPN journal of engineering and applied sciences.2015 vol 10 pp5498-5505 | |
| 25 | 4 | Evaluation of mechanical properties of KENAF based hybrid composite for automotive components replacement | ARPN journal of engineering and applied sciences 2015 vol 10 pp 5518-5523 | |
| 26 | 5 | Investigation of tensile and impact behaviour of abaca-raffia hybrid composite | ARPN Journal of Engineering and Applied Sciences, VOL. 10, NO. 13, 2015,5577-5580. | |
| 27 | 1 | Dr.S. Ramachandran | A Chest compression system for cardiopulmonary Resuscitation | International journal of Mechatronics, Electrical and computer technology, 2016 vol 6(20) pp 2800-2809 |
| 28 | 1 | Mr.L. Saravana Kumar | Effect of injection pressure and combustion chamber geomentry on diesel engine fuelled with Calophyllum Inophyllum Methyl Ester | International Journal of applied engineering research, 2015 Vol 10 (50) pp679-684 |
| 29 | 1 | Mr.R. Ashok Gandhi | Optimization of wear characteristics polypropylene carbon nano tube using taguchi table | Advanced nano materials : synthesis and applications pp 141-144. 2016 |
| 30 | 1 | Mr.V.M. Manickavasagam | Investigation of Tensile Behavior of Flax Abaca Hybrid Epoxy Composite | International Journal Applied Mechanics and Materials, Volume 766-767, 2015, Pages 85-89 |
| 31 | 2 | Evaluation of the double shear and hardness properties of abaca and flax reinforced polymer composite for automotive applications | International Journal Applied Mechanics and Materials, Volume 766-767, 2015, Pages 85-89 | |
| 32 | 3 | A Review on Natural and Bamboo Fiber Composites | International Journal of Advanced Research in Science,Engineering and Technology | |
| 33 | 1 | Mr.K.Venkataraman | Selection of Manufacturing Method using Artificial Neural Network | International Journal Applied Mechanics and Materials, Volume 766-767, 2015, Pages 1201-1206 |
| 34 | 1 | Mr.R. Bhoopathi | Experimental Investigation on Mechanical Properties of hemp- Banana- Glass fiber reinforced properties | Applied Mechanics and materials, 2015 Vol 766-767 pp 167-172 |
| 35 | 1 | Mr.S. Rajesh | Evaluation of tensile behaviour of GFRP/SiC polymer reinforced composites | International Journal Applied Mechanics and Materials, Volume 766-767, 2015, Pages 70-72 |
| 36 | 2 | Design and development of multipurpose drill jig for composite brake lining | TCIFES 2015 proceedings organized by: CSIR-CLRI, ISEE, CAAS management research ISBN : 978-93-85517-006 | |
| 37 | 3 | Investigation of tensile behavior of Kevlar composite | Materials today proceedings 2015 vol00 pp1-6 | |
| 38 | 1 | Mr.C. Parswajinan | Experimental Investigation of Mechanical and Chemical Properties of Aluminium reinforced with MWCNT | International Journal Applied Mechanics and Materials, Volume 766-767, 2015, Pages 287-289 |
| 39 | 2 | A Review on Composite Materials with Ferrous, CNT and Powder Metallurgy | Applied Mechanics and Materials Vols. 813-814 (2015) pp 9-13 | |
| 40 | 3 | Design and development of multipurpose drill jig for composite brake lining | International Conference on Technological Convergence For Information ,Food , Health And Energy Security | |
| 41 | 1 | Mr.Swaminathan G | ACHILLES HEEL OF EDUCATION IN INDIA | GyanodayaVol 9 No 1 Jan-Jun 2016 |
| 42 | 1 | Investigation of preventive maintenance in operational cycle time of main gear box load test in advanced light helicopter | International journal for Innovative research in science and technology 2016 vol 2issue 12 pp 118-128 | |
| 43 | 1 | Mr.Jeykrishnan J | Optimisation of process parameters on EN24 Tool steel using Taguchi technique using EDM | Material science and Engineering, Vol. 149, 2016 |
| 44 | 2 | Parameter Optimisation of EDM in AISI D2 Die steel using Taguchi Technique | Indian Journal of science and technology Vol 9 (43) 2016 | |
| 45 | 1 | Dr.M. Ramesh | Impact Behaviour Analysis of Sisal/Jute and Glass Fiber Reinforced Hybrid Composites | Advanced Materials Research Vols. 984-985 |
| 46 | 2 | Processing and Mechanical Property Evaluation of Kenaf-Glass Fiber Reinforced Polymer Composites | Applied Mechanics and Materials Vols. 766-767 (2015) pp 187-192 | |
| 47 | 3 | Study of Mechanical Properties of Jute-Banana-Glass Fiber Reinforced Epoxy Composites under Various Post Curing Temperature | Applied Mechanics and Materials Vols. 766-767 (2015) pp 211-215 | |
| 48 | 4 | Processin g and Mechanical Property Evaluation of Flax-Glass Fiber Reinforced Polymer Composites | Applied Mechanics and Materials Vols. 766-767 (2015) pp 144-149 | |
| 49 | 5 | Comparisonal Study of Succinylation and Phthalicylation of Jute Fibres: Study of Mechanical Properties of Modified Fibre Reinforced Epoxy Composites | Materials Today: Proceedings 2 ( 2015 ) 2918 - 2927 |
